[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] ofdm decoder problem on USRP2

From: Guanbo Zheng
Subject: [Discuss-gnuradio] ofdm decoder problem on USRP2
Date: Wed, 1 Dec 2010 20:39:08 -0600


I am trying to build the OFDM decoder on GRC based on the FTW 802.11a/g encoder.

At the USRP2 receiver, after CFO compensation, I want to see the QPSK constellation.

Basically, the process is:
bit stream ---- ofdm mod ---- usrp2 sink
usrp2 source -- timing offset comp --- CFO comp ---- ofdm demod ----- constellation sink

Before ofdm_demod, the signal spectrum observed in USRP2_fft is good as far as I know.
But after OFDM demod block, I can not receive anything. No data output!  :(

I read some threads by Veljko, regarding to the parameter setting of OFDM demod block.
But I am not sure about the number of tones, SNR.

Where can I find the definition of this block? What is the meaning of S and Time out?
By the way, my setup environment is ubuntu 9.04 + gnuradio 3.2.2.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]