[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] trying t learn GNU Radio

From: David Clendenen
Subject: Re: [Discuss-gnuradio] trying t learn GNU Radio
Date: Mon, 13 Dec 2010 14:07:10 -0500

Hi, I am a fellow n00b to gnuradio.  Just to add to Tom's advice, when I first started I found that the easiest and quickest way to get familiar with gnuradio is with the gnuradio companion (and reading everything you can find on gnuradio...).  Try searching the web for "gnuradio tutorials."  Some of the best ones that I found that helped me get started are located here:  http://www.csun.edu/~vfeen0br/katzpage/sdr_project/sdrproject.html and here: http://radioware.nd.edu/documentation

Good luck, I hope that helps.


On Mon, Dec 13, 2010 at 11:19 AM, Tom Rondeau <address@hidden> wrote:
On Mon, Dec 13, 2010 at 5:58 AM,  <address@hidden> wrote:
> Hello every one...
> I am just start to learn gnu radio...
> i start to track its C++ part...
> i start it with usrp_source_s/c files...
> can any one tell me that i am on the right way or not...
> & how can i go further...
> i also found a method gnuradio::get_initial_sptr() which takes an object...
> but i am unable to find its meaning or role...
> & also plz help me to guide if there any other way to start lern gnu radio...
> any help would be appriciated...
> Thanks a lot in advance

If you are just starting, I think you're going far too deep too soon.
Start with the Python-level examples and working with GRC to get good
feel for what you can do with GNU Radio and how the blocks interact.
Then start diving deeper.

Go to the project home page for more information:

Specifically, look at the examples mentioned there and that can be
found in the code at gnuradio-examples/python. The "How to Write a GNU
Radio Signal Processing Block" will be useful as you go more into
working with the C++ end of things.

I have also been putting together a few tutorial-like examples here:

Hope this gets you going.


Discuss-gnuradio mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]