[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] cannot ping my USRP2

From: Tobias Schmid
Subject: Re: [Discuss-gnuradio] cannot ping my USRP2
Date: Tue, 14 Dec 2010 19:30:32 +0100
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv: Gecko/20101027 Thunderbird/3.0.10

Hello Matthias,

all thos works. The USRP even works with the common USRP images. But not with UHD.


Am 14.12.2010 18:54, schrieb Matthias Wilhelm:

is the USRP2 starting at all, with LEDs on and the fan running? Was it running 
before? We had the problem that the fuse on the USRP2 was blown. Its rather 
easy to replace once you identified it as the problem.


Am 14.12.2010 um 18:39 schrieb Tobias Schmid:


our institute owns 4 USRP2. Three of them can be pinged.
The 4th one cannot.
It's neither possible to use it with UHD firmware and FPGA image.
If I try uhd_find_device no device is found.
The firmware and the FPGA image on the SD card is working fine.
I checked this using one of my other devices.

Can someone tell me, what the problem might be?
Is it demaged? Is the eeprom demaged?
Or can I solve this problem on my own?

I used to usrp2_recovery.py. But it doesn't change the behavior.

best regards,


reply via email to

[Prev in Thread] Current Thread [Next in Thread]