[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Synchronized packet transmission
From: |
Josh Blum |
Subject: |
Re: [Discuss-gnuradio] Synchronized packet transmission |
Date: |
Sun, 02 Jan 2011 13:08:18 -0800 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.13) Gecko/20101208 Lightning/1.0b2 Thunderbird/3.1.7 |
On 01/02/2011 12:59 PM, Sangho Oh wrote:
> Hello Josh,
>
> I have used this command
>
> dev->send(&buff.front(), samps_to_send,
> md, uhd::io_type_t::COMPLEX_FLOAT32,
> uhd::device::SEND_MODE_FULL_BUFF, seconds_in_future + 0.1);
>
> The reference time for seconds_in_future is not clear to me. When does the
> timer starts?
that last parameter is a timeout. In the example, the samples are sent
several seconds in the future, so the timeout should wait at least that
long. See the docs for that call:
http://www.ettus.com/uhd_docs/doxygen/html/classuhd_1_1device.html#a11cea7a2131f2764e9afa4eab34bd8d5
The metadata specifies the timestamp of the packet:
http://www.ettus.com/uhd_docs/doxygen/html/structuhd_1_1tx__metadata__t.html
> I guess there are large imprecise delay between gnuradio to USRP2 FPGA
> (gnuradio -> ethernet -> FPGA).
>
on the order of 10s of microseconds if the CPU is keeping up.
> If I synchronize two USRPs using sync_to_pps(), just wondering how to
> control the transmit timing from the reference timing stamp, which is reset
> every second?
>
The time will be set at the next pps to the desired value, and increment
forever after (its a 64 bit timer). So nothing is reset or rolls over
every second.
http://www.ettus.com/uhd_docs/doxygen/html/classuhd_1_1usrp_1_1single__usrp.html#a7fdb91ce9c7dd16a2c4cf210ebc8105f
-josh