discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] What Modulation Scheme does RFX400 can perform?


From: Songsong Gee
Subject: Re: [Discuss-gnuradio] What Modulation Scheme does RFX400 can perform?
Date: Wed, 12 Jan 2011 04:08:09 +0900

Thank you for your anwer :)

Then, in short, 

Does the flow graph I mentioned use carrier freq. 450 MHz or not?

From the file source, it is just a baseband signal

2011/1/12 Marcus D. Leech <address@hidden>
On 01/11/2011 11:57 AM, Songsong Gee wrote:
> Same as Title, What Modulation Scheme does RFX400 can perfom?
>
>
Any modulation scheme you can think of that can be represented
efficiently as a series of
 mathematical operations producing a baseband waveform that is then
up-converted by the
 RFX2400 to the final frequency.

In SDR, the hardware doesn't "know" anything about modulation or
demodulation, that's up to the
 software.  The only limitation of the hardware is the bandwidth of the
resulting waveform.

The daughtercards typically anti-alias bandwidth limit the waveforms to
about 25-30MHz or so, on
 the analog mixer inputs/outputs.

--
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org



_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio



--
Seokseong Jeon (aka Songsong Gee)


reply via email to

[Prev in Thread] Current Thread [Next in Thread]