[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] carrier sensing, usrp2 & xcvr2450

From: Matt Ettus
Subject: Re: [Discuss-gnuradio] carrier sensing, usrp2 & xcvr2450
Date: Fri, 14 Jan 2011 15:25:50 -0800
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv: Gecko/20101209 Fedora/3.1.7-0.35.b3pre.fc14 Lightning/1.0b3pre Thunderbird/3.1.7

On 01/14/2011 02:09 PM, Stefan Schmid wrote:
Hi all

I have an usrp2&  xcvr2450 board and I wrote a simple python script
which I use to measure the signal strength and transmit a packet.
Since the xcvr2450 does not support full duplex it switches to
transmitting mode after sending the first packet. Is there a way to
switch back to receiving mode? Or is there another way to implement
such an application using the hardware I have?

It switched back to receive as soon as it is done transmitting.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]