discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Possible WBX Board Failure


From: Marcus D. Leech
Subject: Re: [Discuss-gnuradio] Possible WBX Board Failure
Date: Thu, 10 Mar 2011 14:18:27 -0500
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.13) Gecko/20101209 Fedora/3.1.7-0.35.b3pre.fc14 Thunderbird/3.1.7

On 03/10/2011 02:10 PM, Josh Blum wrote:

On 03/10/2011 10:58 AM, devin kelly wrote:
Hello,

When using a particular WBX daughtercard I get this message from my script:

Current recv sock buff size: 60000000 bytes
mboard0 MIMO master

Warning:
     Unknown transceiver board ID combination...
     RX dboard ID: WBX (0x0053)
     TX dboard ID: Unknown (0xffff)
This is usually a sign that the board is not mounted correctly. Re-mount
the WBX and try again.

-Josh


He says that he tried it on multiple USRP motherboards, so it's unlikely to be, per se, a mounting issue. But I'd
  check for a bent pin on the daughtercard connector.




--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org





reply via email to

[Prev in Thread] Current Thread [Next in Thread]