[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] USRP2 - external clock pps python example

From: Burak TUYSUZ
Subject: Re: [Discuss-gnuradio] USRP2 - external clock pps python example
Date: Tue, 12 Apr 2011 21:06:22 -0400

Hi Josh,
Is it possible to trigger storing data with pps using GRC I could nor
find a related email.
If so should that be included in FPGA or in software. A related work
would be great
Thanks in advance.

On Mon, Apr 11, 2011 at 9:43 PM, Josh Blum <address@hidden> wrote:
> On 04/11/2011 02:35 PM, Burak TUYSUZ wrote:
>> Is there any example python code showing the usage of external clock
>> and pps inputs of USRP2
>> Thank you in advance
>> -Burak
> A good python example would be code generated by grc when you setup the
> "ref clock" and "sync" parameters in the uhd usrp source/sink blocks.
> http://code.ettus.com/redmine/ettus/projects/uhd/wiki#Gnuradio-UHD
> -Josh
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Ph.D. Candidate, Research Assistant
The Pennsylvania State University
Electrical Engineering
329 Electrical Engineering East Building
University Park, PA 16802

This e-mail message and any included attachments are confidential,
intended only or the recipient named above, and may contain
information that is privileged and exempt from disclosure under
applicable law.  If you have received this message in error, or are
not the named recipient, please immediately notify the sender by
return e-mail and delete all copies of this message.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]