Re: [Discuss-gnuradio] SBX Transceiver DBoard Now Available

[Tyrel Newton]

Matt -

Are there schematics available for the SBX daughterboard? I can't find them in 
the usual places.

Thanks,
Tyrel

On Apr 15, 2011, at 11:21 AM, Matt Ettus wrote:

> 
> =========================================================================
> 
> Ettus Research is proud to announce that the SBX transceiver
> daughterboard is now available for purchase.  The SBX has the following
> performance characteristics:
> 
> - 400 MHz to 4.4 GHz frequency coverage
> - +16 to +20 dBm TX output power, with 32dB of power control range
> - 0 dBm IIP3 on Receive
> - 5-7 dB NF below 3 GHz, 7-10 dB NF between 3 and 4 GHz, 10-13 dB NF
> between 4 and 4.4 GHz.
> - Full duplex capable
> - Fully supported by the UHD driver system
> - Works with the entire USRP family (*)
> 
> 
> (*) USRP1 systems with serial number lower than 500 will need a
> modification to work with the SBX.  All other USRP1, USRP2, N200, N210,
> E100, and E110 systems will work without modification, as long as you
> are using the UHD drivers.
> 
> You can see a picture of the SBX here:
> 
>       http://www.ettus.com/images/SBX.JPG
> 
> The SBX costs $475 and can be purchased from our Orders web page:
> 
>       http://www.ettus.com/order
> 
> =========================================================================
> 
> Matt Ettus
> President, Ettus Research LLC
> 
> 
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio