[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS
From: |
Paul Lambert |
Subject: |
[Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS |
Date: |
Tue, 7 Jun 2011 12:28:54 +0200 |
Hello list,
I'm having a lot of trouble here while trying to make openBTS work with my USRP1
to play with GSMs.
First of all, a little description of my setup:
Software:
openbts-2.6.0Mamou
gnuradio v3.4.0git-130-g207a2ae7
UHD from git
OS: ubuntu 11.04
# sudo lsusrp
USRP 0 serial number 4c76a203
RX d'board A: WBX NG RX
RX d'board B: DBS Rx
TX d'board A: WBX NG TX
TX d'board B: <none>
/usr/local/share/gnuradio/examples/usrp/usrp_benchmark_usb.py
Max USB/USRP throughput = 32MB/sec
I'm using a FA-SY clock to get 52Mhz and I followed the guide in [1]
I didn't modify any of the code, since I'm using gnuradio 3.4. (But I
adapted my OpenBTS.config)
When I start openBTS I get the following output:
http://pastebin.com/raw.php?i=nKbG4j3z (I pasted the whole output)
Here is the openBTS config I use:
http://pastebin.com/raw.php?i=aUQfYWGu
(This is the last I used, but I tried several other configs)
My phones cannot find the network, I'm trying with a Motorolla C123,
Nokia 3510i and Nokia E71. I'm not sure where I should search next, I
google'd a lot an read documentation, tried out the fixes described in
forums etc.
Strange behaviour (maybe normal, but not sure):
"sudo usrp_siggen.py --sine
Press Enter to quit: "
No more output...
I would be glad if somebody had an idea where I could look next.
With best regards,
Marc
[1]: http://gnuradio.org/redmine/wiki/1/OpenBTSClockModifications
- [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS,
Paul Lambert <=
- Re: [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS, Marcus D. Leech, 2011/06/07
- Re: [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS, Thomas Tsou, 2011/06/07