[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] usrp2 on windows - network cable unplugged
From: |
Marcus D. Leech |
Subject: |
Re: [Discuss-gnuradio] usrp2 on windows - network cable unplugged |
Date: |
Thu, 18 Aug 2011 00:16:25 -0400 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.15) Gecko/20101027 Fedora/3.0.10-1.fc12 Thunderbird/3.0.10 |
On 08/18/2011 12:09 AM, Kyle Zhou wrote:
>
> Yes, I did configured it as static IP 192.168.10.1
> Actually windows did show 'connected, firewalled'. but after a few
> seconds, it turned to unplugged. This is weird to me.
Well, if it really is configured for a static IP, you might see if
there's a way to force the card to only use
1GiGe. I don't know how to do that in windows, but I do know that
some 1GiGe PHY implementations
don't auto-negotiate properly, so if you can force the ethernet
hardware to run always at 1GiGe, and
not auto-speed negotiate, that sometimes helps.
--
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org