[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] frequency synthesis
From: |
Daniel Dekst |
Subject: |
Re: [Discuss-gnuradio] frequency synthesis |
Date: |
Tue, 25 Oct 2011 15:08:13 +0800 (CST) |
Hi, Josh,
Thanks a lot!
They are results of two USRP1.
Now I use USRP E100 to transmit, USRP1 to receive, I got
http://www.cse.msu.edu/~huangpe3/usrp/e100tx_1r.png
with rx_ascii_art_dft
Seems there is no signal. I checked it with usrp_fft.py
http://www.cse.msu.edu/~huangpe3/usrp/e100tx_usrp1r.png
The frequency offset is too large. There must be something wrong, so
I change to use USRP1 for transmission and E100 for receiving, then I got
http://www.cse.msu.edu/~huangpe3/usrp/1tx_e100r.png
There is a signal near 5500.5MHz
Do I need to add more parameters for transmission with e100?
sudo ./tx_waveforms --rate 2e6 --freq 5.5e9 --ampl 1.0 --ant J1 --wave-type SINE --wave-freq 0.5e6
sudo ./rx_ascii_art_dft --rate 2e6 --freq 5.5e9 --ant J1 --num-bins 256 --dyn-rng
120
Thanks,
dekst