[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Error in testing benchmark_tx/rx.py
From: |
Songsong Gee |
Subject: |
[Discuss-gnuradio] Error in testing benchmark_tx/rx.py |
Date: |
Sat, 19 Nov 2011 14:54:50 +0900 |
I'm currently testing UHD.
I use two USRPs with one SBX on each.
and I got GNU Radio 3.5.0rc0 on Ubuntu 10.10 and benchmark programs
supporting UHD.
When I run benchmark_tx/rx.py, however,
address@hidden $ ./benchmark_tx.py -f 410M
address@hidden $ ./benchmark_rx.py -f 410M
I can see 'dots' representing a signal is transmitted on a transmitter side.
but a receiver does give nothing on a screen.
and the screens on the both side, I got this message.
====================================================
No gain specified.
Setting gain to 5.750000 (from [-20.000000, 31.500000])
UHD Warning:
The hardware does not support the requested TX/RX sample rate:
Target sample rate: 0.050000 MSps
Actual sample rate: 0.250000 MSps
Symbol Rate: 25000.000000
Requested sps: 2.000000
Given sample rate: 250000.000000
Actual sps for rate: 10.000000
Requested sample rate: 50000.000000
Actual sample rate: 250000.000000
====================================================
What did I do wrong?
1. Wrong frequency option (either tx or rx)
2. Wrong/Unspecified sample rate option (either tx or rx)
3. Too weak signal strength to catch
4. Or...?
--
Seokseong Jeon, PhD Candidate
Communication & Networks Lab
IT Convergence Engineering (ITCE), POSTECH, Korea
+82 10 8338 1229, gee.songsong at gmail . com
- [Discuss-gnuradio] Error in testing benchmark_tx/rx.py,
Songsong Gee <=