discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Problem with FW and FPGA images


From: George Sklivanitis
Subject: Re: [Discuss-gnuradio] Problem with FW and FPGA images
Date: Fri, 13 Apr 2012 02:12:15 -0400

Hi Josh, 

The sequence of the LEDs is D and F coming green just in the same way as the video apart from the B led where I cannot see why to come green? 

The ethernet is properly configured. 

The green led on the ethernet also goes on. There is no way that the ethernet jack is faulty or sth like that as the same usrp2 with the same settings is just working fine on another laptop with UHD_003.004.000 - 325- g7e296167 revision. 

I don't really know what's the problem, may be I will try solving it by monitoring the serial output. 

The thing that really attracted my attention is that sometimes there is a connection and after just typing uhd_find_devices the connection is lost.

Any other ideas guys?

Thanks again, 
George

On Fri, Apr 13, 2012 at 2:00 AM, Josh Blum <address@hidden> wrote:


On 04/12/2012 05:15 PM, George Sklivanitis wrote:
> Hello everyone,
>
> The last 2 days I am dealing with a problem of using gnuradio with USRP2s.
>
> I have successfully installed both gnuradio and uhd using the
> build-gnuradio scipt into 3 brand new core i-7 laptops.
>
> However, after using the default usrp2_card_burner gui for burning the
> firmware and fpga images into a Kingston 2GB SD card provided with the
> USRP2 I cannot find the USRP2 device neither when using the command
> uhd_find_devices nor by doing ping in 192.168.10.2. Sometimes USRP2 appears
> to be found but afterwards the communication is compromised. I have also
> tried disabling the firewall of ubuntu but nothing changed.
>
> Are there any new images for UHD_003.004.001-27-g93d4a16f revision in the
> main branch that I am not aware of?
>

Few things I can think of:

1) Do you see this boot sequence on power up?
https://www.youtube.com/watch?v=REDK7M-83WQ

2) Do you see the green LED on the ethernet jack go on?

3) The serial port can also help:
http://files.ettus.com/uhd_docs/manual/html/usrp2.html#monitor-the-serial-output

4) ethernet configured? just a thought:
http://files.ettus.com/uhd_docs/manual/html/usrp2.html#setup-networking

-Josh

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio



--
Sklivanitis Georgios
Postgraduate Student
Telecommunications Division
Technical University of Crete
ECE Dept.
Tel. : 28210 59257


reply via email to

[Prev in Thread] Current Thread [Next in Thread]