Re: [Discuss-gnuradio] UHD Driver for USRP1 not found

[Ji Slee]

Dear Mr. Blum,

Belated thanks for your advice. I did install libusb1.0-dev and the
post install tasks, but I still got the same error as before (the
devices not found error ) and the computer did not recognize the
USRP1. I will keep trying though, thanks for your advice!

Many thanks,
J.
On Sun, Apr 29, 2012 at 3:33 PM, Josh Blum <address@hidden> wrote:
>
>
> On 04/29/2012 12:29 PM, Ji Slee wrote:
>> Hello,
>>
>> I am a high school student who has been working with gnuradio. I have
>> been trying to reinstall gnuradio with UHD, but am getting the No
>> device error. In internet searches, I have found others who have had
>> the same error, but I have not found the solution to the problem.
>>
>> I installed per redmine and ettus instructions below (also included prior 
>> dep.)
>> For UHD:
>>
>> git clone git://code.ettus.com/ettus/uhd.git
>>
>> cd uhd/host
>> mkdir build
>> cd build
>> cmake ../
>
> was usrp1 one of the configured components?
> If not you need to install libusb1.0-dev
>
> http://files.ettus.com/uhd_docs/manual/html/build.html#libusb
>
>> make
>> make test
>> sudo make install
>>
>
> Did you do the post install tasks? like installing udev rules?
>
> http://files.ettus.com/uhd_docs/manual/html/transport.html#setup-udev-for-usb-linux
>
> -josh
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio