[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] gnuradio-companion & hamlib bodging

From: Darren Long
Subject: Re: [Discuss-gnuradio] gnuradio-companion & hamlib bodging
Date: Sun, 28 Oct 2012 17:55:52 +0000
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:16.0) Gecko/20121011 Thunderbird/16.0.1

Never mind.  I've bodged it directly in the generated python.


On 28/10/12 14:35, Darren Long wrote:
> Hi,
> In gnuradio-companion,  I'm tring to control my KX3 transceiver using
> hamlib's rigctl utility.
> I've bodged a call to:
>     float(pexpect.run("rigctl -m 229 -r /dev/ttyUSB0 -s 38400 f"))
> in a variable block's value, and then used that to set the wxgui
> waterfall sink's baseband frequency, which works but i'm trying to
> figure out 2 more things.
> 1) Can i do something similar to set the KX3's vfo frequency? a similar
> command to rigctl can be used if i can bodge the call  into Freq Set
> Varname somehow.
> 2) Somehow i need to accommodate physical knobulation of the VFO on the
> radio, and keep the waterfall scale in sinc with the radio, i.e. by
> polling the same command i've used above.  Is there any chance i can do
> that via similar bodging in gnuradio-companion, or, am I actually going
> to have to write actually write some code?
> Cheers,
> Darren, G0HWW
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]