[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] (no subject)

From: Nazmul Islam
Subject: Re: [Discuss-gnuradio] (no subject)
Date: Thu, 6 Dec 2012 16:17:53 -0500

Which port is your antenna connected to? In SBX/WBX daughterboards, you can only transmit through Tx/Rx. However, you can receive through both Tx/Rx and Rx2.

This might not be related to your problem. But just checking.



On Thu, Dec 6, 2012 at 2:14 PM, zhengxiangwei <address@hidden> wrote:
Dear Guys,
        I encounter one strange problem, I can use usrp to receive signal but cannot transmit signal. My usrp is USRP2 and gnuradio version 3.2.2.
       When running ursp2_siggen.py, it do not return any error but when I use a spectrum analysis, it shows no signal is transmitted.
       When running benchmark_tx.py and bbn80211_tx.py, it also reports no error, but there is no signal sent out.
       Do you guys have any advice?
       Thank you. 

Xiangwei Zheng
Research Assistant
ECE Department, Virginia Tech
Office: Durham Hall 365
Tel: 540-553-6235

Discuss-gnuradio mailing list

Muhammad Nazmul Islam

Graduate Student
Electrical & Computer Engineering
Wireless Information & Networking Laboratory
Rutgers, USA.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]