discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Build fails


From: Josh Blum
Subject: Re: [Discuss-gnuradio] Build fails
Date: Fri, 08 Feb 2013 02:48:37 -0600
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130106 Thunderbird/17.0.2


On 02/08/2013 02:08 AM, Ralph A. Schmid, dk5ras wrote:
> Hi,
> 
> On a relatively fresh installed Kubuntu 12.04 LTS 32bit x86 with all updates
> the build of gnuradio fails. I am using the build script, but also the
> manual build fails in a similar way. Already installed on the machine is a
> partial gnuradio 3.4.2 for OpenBTS support, together with USRP1 drivers,
> yate PBX. This stuff built without problems and works just fine.
> 
> See the messages at the bottom of the mail.
> 
> I am normally a Win user and far from being a linux pro, but I do not fear
> the command line and editing files. Reminds me a bit of good old Amiga times
> :-)
> 
> Any ideas what I should do? 
> 

Someone had this exact same error in a private email but we never got to
the bottom of it.

Was there a previous install of gnuradio by any chance (in case
something is accidentally building against installed headers)?

It may be the case that a recent change is adding an extra typdef or
template to a swig .i file and swig is being dumb and exporting it twice.

Or maybe its one of those things that shows up on an x86 machine vs x64
due to how integer types map to fixed width typedefs... So many ways to
fail :-)

So, what version of gnuradio produced the errors below? It wasnt the
3.4.2, right?

Can you attach the culprit gnuradio_core_generalPYTHON_wrap.cxx

-josh

> Thanks a lot, and with best regards
> 
> Ralph.
> 
> These are the scripts last words:
> 
> [ 39%] Building CXX object
> gnuradio-core/src/lib/swig/CMakeFiles/_gnuradio_core_general.dir/gnuradio_co
> re_generalPYTHON_wrap.cxx.o                              
> /home/ras/gnuradio/build/gnuradio-core/src/lib/swig/gnuradio_core_generalPYT
> HON_wrap.cxx:6067:22: error: redefinition of ‘struct swig::traits<unsigned
> int>’
> /home/ras/gnuradio/build/gnuradio-core/src/lib/swig/gnuradio_core_generalPYT
> HON_wrap.cxx:5493:22: error: previous definition of ‘struct
> swig::traits<unsigned int>’
> /home/ras/gnuradio/build/gnuradio-core/src/lib/swig/gnuradio_core_generalPYT
> HON_wrap.cxx:6071:23: error: redefinition of ‘struct
> swig::traits_asval<unsigned int>’
> /home/ras/gnuradio/build/gnuradio-core/src/lib/swig/gnuradio_core_generalPYT
> HON_wrap.cxx:5497:23: error: previous definition of ‘struct
> swig::traits_asval<unsigned int>’
> /home/ras/gnuradio/build/gnuradio-core/src/lib/swig/gnuradio_core_generalPYT
> HON_wrap.cxx:6077:23: error: redefinition of ‘struct
> swig::traits_from<unsigned int>’
> /home/ras/gnuradio/build/gnuradio-core/src/lib/swig/gnuradio_core_generalPYT
> HON_wrap.cxx:5503:23: error: previous definition of ‘struct
> swig::traits_from<unsigned int>’
> /home/ras/gnuradio/build/gnuradio-core/src/lib/swig/gnuradio_core_generalPYT
> HON_wrap.cxx:6087:22: error: redefinition of ‘struct
> swig::traits<std::vector<unsigned int> >’
> /home/ras/gnuradio/build/gnuradio-core/src/lib/swig/gnuradio_core_generalPYT
> HON_wrap.cxx:5513:22: error: previous definition of ‘struct
> swig::traits<std::vector<unsigned int> >’
> make[2]: ***
> [gnuradio-core/src/lib/swig/CMakeFiles/_gnuradio_core_general.dir/gnuradio_c
> ore_generalPYTHON_wrap.cxx.o] Error 1
> make[1]: ***
> [gnuradio-core/src/lib/swig/CMakeFiles/_gnuradio_core_general.dir/all] Error
> 2
> make: *** [all] Error 2
> make failed
> Exiting Gnu Radio build/install
> 
> 
> --
> 
> Ralph A. Schmid
> Mondstr. 10
> 90762 Fürth
> +49-171-3631223
> address@hidden
> http://www.bclog.de/
> 
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]