[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] timed command

From: Josh Blum
Subject: Re: [Discuss-gnuradio] timed command
Date: Mon, 04 Mar 2013 01:56:55 -0600
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130221 Thunderbird/17.0.3

On 03/03/2013 09:28 PM, Gong Zhang wrote:
> Hi,
> I wanna transmit a 1khz Sinusoidal signal for one second and transmit
> 2khz for another second.The code maybe something like this:
> set_command_time(&mytime)
> sig_sin_source.work(...)
> set_command_time(&mytime+1)
> sig_sin_source.work(...)
> But as I know,the first set_command_time would back-pressure all
> subsequent timed commands.This would make it impossible for the second
> set_command_time to reach the USRP buffer in time.
> Is it correct?And what's the suggestion?
> I appreciate any tips.
> Thank you.

For timing the transmission of samples you will want to use the stream
tagging feature of gnuradio (some examples and docs in the link):

The timed commands thing is really for timing settings like tuning the
device, or setting gain at a specific time, its separate from the
streaming interface.


> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]