[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] right source to input message

From: manjusha
Subject: Re: [Discuss-gnuradio] right source to input message
Date: Thu, 7 Mar 2013 17:21:33 -0800 (PST)

Thanks for your reply josh..

I only have the message socket block now.But still i get the attached

And,you were suggesting an amplitude < 1 which i am not aware of..can you
please explain.
Also,i am using a trying to transmit a message so why do i need a packet

thanks.. tx_message_socket.png

* Delete this: The pad source is for hierarhical blocks.
* Delete this: That message source is not related
* I recommend to reduce the amplitude of the signals sent to the usrp
source < 1.0 magnitude

* You do not need to feed the input of the message socket block - that
is for writing to the socket. You would probably connect a packet
deframer from the receive chain there.

Your flow graph is ready, if you write a packet into this socket, it
will transmit something.

the pad source is for making hierarchical blocks, you probably dont want

There are 3 ways to get data into that packet encoder from gr extras.

* A message socket block
* The stream to blob block
* A custom block that outputs message blobs

View this message in context: 
Sent from the GnuRadio mailing list archive at Nabble.com.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]