[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Porting new hardware to GNURadio

From: Douglas Geiger
Subject: Re: [Discuss-gnuradio] Porting new hardware to GNURadio
Date: Sun, 17 Mar 2013 15:12:14 -0400

 If you're only interested in GnuRadio on the Zedboard, one method
would be to build it using OpenEmbedded. There's a little bit of a
learning curve, but Phil Balister has done work on this:


I can only confirm that it works on the zc702 dev board, but there is
apparently a fork of his repo to add support that is specific to the
Zedboard at:



On Sun, Mar 17, 2013 at 12:49 PM, Andy Fung <address@hidden> wrote:
> Hi Robin,
> Did you finish porting GnuRadio to the Xilinx Zedboard?
> If so, would you please share the information with me?
> Thanks very much!
> Andy
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Doug Geiger

reply via email to

[Prev in Thread] Current Thread [Next in Thread]