[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Radio frequency range description list?
From: |
Andre-John Mas |
Subject: |
Re: [Discuss-gnuradio] Radio frequency range description list? |
Date: |
Tue, 2 Apr 2013 21:37:42 -0400 |
Hi Alexandru,
There are certainly charts and tables of this data, but from what I have seen
they are either in non-machine parsable format (PDF) or they are targeted at
commercial entities or government organisations.
If there is already something corresponding to what I looking for, that is
machine parsable and suitable for open source use, then I will gladly shift my
focus to what already exists. I don't want to duplicate effort if I don't need
to.
If you know of any open source software that already has a data file of a sort,
then I would be interested in knowing.
Regards
Andre
Sent from my tablet
On 2013-04-02, at 10:51, "Alexandru Csete" <address@hidden> wrote:
> Hi Andre,
>
> I think it would be a mistake to consider a no reply on this list as a
> general no to your question. Clearly, there must be such databases out
> there, otherwise maintaining things like the US Frequency Allocation
> Chart [1] or the ITU-RR [2] would be a nightmare. How you get the
> source of those publications I do not know. There are also smaller
> databases embedded in various SDR and other receiver software out
> there that could be a starting point.
>
> I foresee two significant challenges in implementing your idea:
> - Most of the spectrum is allocated for multiple uses
> - Allocations are in most cases made for specific uses but they do not
> necessarily imply a specific configuration
>
> I think it will be a big help for you to narrow down the scope as much
> as possible.
>
> [1]
> http://en.wikipedia.org/wiki/File:United_States_Frequency_Allocations_Chart_2011_-_The_Radio_Spectrum.pdf
> [2] http://www.itu.int/pub/R-REG-RR
>
>
> On Tue, Apr 2, 2013 at 5:29 AM, Andre-John Mas <address@hidden> wrote:
>> Hi,
>>
>> In the absence of any existing solution I am interested in trying to put
>> something together, possibly as a GitHub project?
>>
>> Although a Wiki could be used, my focus is on a solution that is machine
>> parsable, so any application could make use of it. I am not sure the best
>> file format to use, but currently three come to mind:
>> - xml
>> - json
>> - csv
>>
>> From looking at some documents that list frequency allocations, I figure
>> that the files would be split into individual files, that cover the
>> allocation by ITU region, country and other group, with the footnotes being
>> in files separate to the allocation list, so that they could eventually be
>> localised if need be. Something like:
>>
>> frequency-allocations/
>> itu_region1.txt
>> itu_region2.txt
>> eu.txt
>> uk.txt
>> us.txt
>> footnotes/
>> ca.txt
>> us.txt
>> rules/
>> us.txt
>>
>>
>> The fields I am thinking of are, at this point
>> - frequency range
>> - footnotes
>> - rules
>> - service type
>> - service category
>> - data format
>>
>> This is a first stab, so any feedback would be useful. One thing that I seem
>> to be struggling with is how best to specify information that would make it
>> clear which data encoder/decoder to be using. For example, I can imagine an
>> application detecting that you have selected a frequency range that
>> corresponds to GPS and brings a view that shows the GPS data in a human
>> readable form or that you are in a range that represents broadcasts TV and
>> brings up a view that shows the broadcast data.
>>
>> It may also be useful to have a list of channels, according to service type?
>>
>> Please let me know what you think.
>>
>> Andre
>>
>>
>>
>>
>>
>>
>> ________________________________
>> From: address@hidden
>> To: address@hidden
>> Date: Mon, 1 Apr 2013 01:13:17 +0000
>> Subject: [Discuss-gnuradio] Radio frequency range description list?
>>
>>
>> Hi,
>>
>> Has anyone created a machine parsable file that lists radio frequencies and
>> what is covered by that range?
>>
>> At the simplest level I am thinking of something that would include country
>> code, a frequency range and the identifier to what that range is, and
>> possibly a string indicating typical data encoding. The idea being when
>> using a UI, such as Gqrx you would be able to have a label identifying what
>> sort of data you should be seeing and in other cases use this information
>> for automatically loading the right configuration(s) for handling that
>> frequency range.
>>
>> Andre
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list address@hidden
>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>