[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] transmitter receiving its own packet
From: |
Rahman, Muhammad Mahboob Ur |
Subject: |
Re: [Discuss-gnuradio] transmitter receiving its own packet |
Date: |
Wed, 10 Apr 2013 05:27:27 +0000 |
Hi Josh,
>So it would be possible to mute the ADC samples when the device is
>transmitting. However, that might only be desirable in a couple of use
>cases, and there are probably a dozen ways to solve this from all the
>way down at the physical layer up the the MAC layer:
>* mute the RX ADC when transmitting (probably an FPGA mod)
We are interested to operate our USRP N200 radios in TDM. In other words, we
want each of our radio to transmit and receive at the same frequency. Since we
expect very high self-interference in this case, we would be interested to play
a little bit with the ADC mute option. Could you provide us some pointers on
where to modify the FPGA code to do this? Also, how much realistic/feasible it
sounds if we want to control ADC (on/off) switching from within the GRC flow
graph (at the very least, we will expect some latency associated with this
operation).
Thanks in anticipation,
Mahboob
- [Discuss-gnuradio] transmitter receiving its own packet, Sahoo, Anirudha, 2013/04/09
- Message not available
- Message not available
- Re: [Discuss-gnuradio] transmitter receiving its own packet, Marcus D. Leech, 2013/04/09
- Re: [Discuss-gnuradio] transmitter receiving its own packet, M. Ranganathan, 2013/04/09
- Re: [Discuss-gnuradio] transmitter receiving its own packet, Josh Blum, 2013/04/09
- Re: [Discuss-gnuradio] transmitter receiving its own packet,
Rahman, Muhammad Mahboob Ur <=
- Re: [Discuss-gnuradio] transmitter receiving its own packet, Josh Blum, 2013/04/10
- Re: [Discuss-gnuradio] transmitter receiving its own packet, Marcus D. Leech, 2013/04/09
Message not available