[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Xlate FIR filter broken in gr 3.7

From: Anton Komarov
Subject: Re: [Discuss-gnuradio] Xlate FIR filter broken in gr 3.7
Date: Wed, 7 Aug 2013 15:56:41 +0400

Ok, i've attached very simple grc chart 
with slider you can change the frequency, two waterfalls shows spectrums before and after xlating.
So i had test it in apco25 env and took apco signals as a reference. So when i saw signal e.g. at 451.378 MHz and tuned to it i saw no signal after xlating nevertheless it was the same time on waterfall before xlating.

You can test this chart with you radio environment.

Then i testing the same logic with gr 3.6 (code is not compatible i have to redraw it..) and here it is! xlating worked like a charm.

On Wed, Aug 7, 2013 at 1:48 PM, Martin Braun (CEL) <address@hidden> wrote:
On Wed, Aug 07, 2013 at 01:00:32PM +0400, Anton Komarov wrote:
> Hi, made an attempt to test my python scripts with new 3.7.0 of GR
> and what i am seeing xlate fir filter is broken
> previously xlate worked perfect with 3.6 version
> tested with waterfalls and i see wrong xlating
> i think developers should pay attention to this issue

Hi Anton,

can you please elaborate on this bug. Ideally, could you post an issue
on our tracker: http://gnuradio.org/redmine/projects/gnuradio/issues

Specify what you configured, what the expected outcome was and what
happened instead.


Karlsruhe Institute of Technology (KIT)
Communications Engineering Lab (CEL)

Dipl.-Ing. Martin Braun
Research Associate

Kaiserstraße 12
Building 05.01
76131 Karlsruhe

Phone: +49 721 608-43790
Fax: +49 721 608-46071

KIT -- University of the State of Baden-Württemberg and
National Laboratory of the Helmholtz Association

Discuss-gnuradio mailing list

Attachment: test_gr37.grc
Description: Binary data

reply via email to

[Prev in Thread] Current Thread [Next in Thread]