|
From: | Lin HUANG |
Subject: | Re: [Discuss-gnuradio] [USRP-users] best transmitter/receiver setup for large coverage |
Date: | Thu, 15 Aug 2013 19:49:38 +0800 |
Hi,
I am using usrp2 and gnuradio 3.3.0.
I want to use benchmark_tx.py as transmitter and benchmark_rx.py as receiver.
so that multiple receiver at distance of around 1 KM should get good signal strength.
So could you please let me know the best options for tx and rx waveform, so I could get the maximum range of coverage.
best options means:
transmitter frequency, tx gain, tx amplitude and rx-gain, if there is any other then let me know.
I need this to do spectrum sensing with energy detection.
with Thanks,
Dilip
_______________________________________________
USRP-users mailing list
address@hidden
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
[Prev in Thread] | Current Thread | [Next in Thread] |