Re: [Discuss-gnuradio] problem running burst detect

[Marcus D. Leech]

On 08/27/2013 11:58 AM, Nemanja Savic wrote:
> There is also no --args option. Here are options:
>
> Options:
>   -h, --help            show this help message and exit
>   -a ADDRESS, --address=ADDRESS
>                         select address of the device
>                         [default=addr=192.168.10.2]
>   -f FREQ, --freq=FREQ  set frequency to FREQ
>   -g GAIN, --gain=GAIN  set gain in dB [default=0]
>   -R SAMP_RATE, --samp-rate=SAMP_RATE
>                         set USRP sample rate [default=200000]
>   -t THRESHOLD, --threshold=THRESHOLD
>                         Set the detection power threshold (dBm) 
> [default=-60
>   -T, --trigger         Use internal trigger instead of detector
>                         [default=False]
There is, as you can see above, a "-a" or "--address" option