discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] How to use USRP to detect and collect weak satell


From: Mark McCarron
Subject: Re: [Discuss-gnuradio] How to use USRP to detect and collect weak satellite signals
Date: Wed, 04 Sep 2013 14:27:16 +0100
User-agent: K-9 Mail for Android

The majority of thermal noise enterimg the receiver is from the antenna and the path to the LNA. Freeze the antenna and this path, then you may be able to see GPS.

Lookup the formula for MDS and it will give you an idea of the temperature you need. Then select a coolant.

Thermal noise is bandwidth dependent, so you may need multiple receivers. I don't know of any single chip solutions available to the public.

Tom Rondeau <address@hidden> wrote:
On Wed, Sep 4, 2013 at 4:45 AM, Nemanja Savic <address@hidden> wrote:
After installing 3.6.5.1 there is a problem while when running flowgraph.
Flowgraph won't start, and the error is following:

Using Volk machine: avx_64_mmx
-- Loading firmware image: /usr/local/share/uhd/images/usrp1_fw.ihx... done
-- Opening a USRP1 device...
-- Loading FPGA image: /usr/local/share/uhd/images/usrp1_fpga.rbf... done
-- Using FPGA clock rate of 64.000000MHz...
*** glibc detected *** /usr/bin/python2.6: malloc(): memory corruption:
0x0000000005661000 ***
*** glibc detected *** /usr/bin/python2.6: malloc(): memory corruption:
0x0000000005661000 ***

Is this problem due to python 2.6 maybe?

Cheers

Shouldn't be. I believe that I've tested 3.7 using Python 2.5 and 2.6.

How about just starting gnuradio-companion and seeing if you can run a
simple flowgraph without any hardware?

Did ctest (or 'make test') pass?


--
Sent from my Android device with K-9 Mail. Please excuse my brevity.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]