discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Is there a way to get already programmed blocks?


From: West, Nathan
Subject: Re: [Discuss-gnuradio] Is there a way to get already programmed blocks?
Date: Wed, 30 Oct 2013 18:17:48 -0500

On Wed, Oct 30, 2013 at 2:53 PM,  <address@hidden> wrote:
> Ok I followed the instructions for installing gnuradio on
> https://github.com/Nuand/bladeRF/wiki/Getting-Started%3A-Linux. The commands
> go as follows.
>
> $ mkdir -p ~/sandbox/gnuradio-builds $ cd ~/sandbox/gnuradio-builds $ wget
> http://www.sbrac.org/files/build-gnuradio $ chmod +x ./build-gnuradio $
> ./build-gnuradio -m prereqs gitfetch
>
> $ cd ~/sandbox/gnuradio-builds/gnuradio/ $ git checkout -b git-v3.7.1 v3.7.1
> $ mkdir build $ cd build $ cmake
> -DCMAKE_INSTALL_PREFIX=/opt/gnuradio-3.7.1git ../ $ make && sudo make
> install
>
> $sudo kwrite /etc/profile.d/gnuradio.sh
>
> Put the following in the created file:
>
> #!/bin/bash # Add GNU Radio binaries to the search path export
> PATH=$PATH:/opt/gnuradio-3.7.1git/bin # Add GNU Radio python libraries to
> python search path if [ $PYTHONPATH ]; then export
> PYTHONPATH=$PYTHONPATH:/opt/gnuradio-3.7.1git/lib/python2.7/dist-packages
> else export PYTHONPATH=/opt/gnuradio-3.7.1git/lib/python2.7/dist-packages fi
>
> $sudo kwrite /etc/ld.so.conf.d/gnuradio.conf
>
> Put the following in the created file:
>
> /opt/gnuradio-3.7.1git/lib
>
> $ sudo ldconfig -v | grep gnuradio
>
> Now for Osmosdr
>
> $ cd ~/sandbox/gnuradio-builds/gr-osmosdr $ mkdir build $ cd build $ cmake
> -DCMAKE_INSTALL_PREFIX=/opt/gnuradio-3.7.1git ../ $ make && sudo make
> install && sudo ldconfig
>
>
> These are the steps I followed, I'm not sure why the QT and WX blocks don't
> appear. I saw that somebody sent in a concern about QT being disabled
> because gnuradio only runs on versions qt4.40-4.8.4.
> So I installed version qt4.8.4 and changed the system default to be 4.8.4
> instead of 5.0.1. Unfortunately this did not help my situation. Any further
> suggestions?
>
> Regards,
>
> Michael A. Horvat
>
>
> -------- Original Message --------
> Subject: Re: [Discuss-gnuradio] Is there a way to get already programmed
> blocks?
> From: "Martin Braun (CEL)" <address@hidden>
> Date: Tue, October 29, 2013 5:32 am
> To: address@hidden
>
> On Mon, Oct 28, 2013 at 11:10:05AM -0700, address@hidden wrote:
>> I am trying to use Gnuradio with the bladeRF software defined radio
>> technology,
>> so I followed the steps for installing Gnuradio towards the bottom of the
>> page
>> of the following website https://github.com/Nuand/bladeRF/wiki/
>> Getting-Started%3A-Linux. I am running a Debian ubuntu OS and the kernal
>> is
>> 3.11.0-12-generic. I noticed that when I installed the Gnuradio, I had the
>> QT
>> sinks and sources that I was looking for. But I think when I changed the
>> libraries to incorporate gr-osmosdr, they disappeared. The only sources
>> and
>> sinks that I have now are osmocom source and sink, and RTL-SDR source. I
>> suppose the Osmocom sink is capable of all the same scope guis? I cant
>> seem to
>> find anything online as to how to use the Osmocom sink. Is there anyway
>> for me
>> to have the osmocom blocks without losing the QT blocks? Sorry if this
>> seems
>> trivial, I am new to all of this.
>
> Michael,
>
> there's no reason the QT blocks should vanish when you install osmo.
> Can you detail the steps of how you installed GR, and then osmo.
>
> MB
>
> PS: And please reply to the list.
> --
> Karlsruhe Institute of Technology (KIT)
> Communications Engineering Lab (CEL)
>
> Dipl.-Ing. Martin Braun
> Research Associate
>
> Kaiserstra├če 12
> Building 05.01
> 76131 Karlsruhe
>
> Phone: +49 721 608-43790
> Fax: +49 721 608-46071
> www.cel.kit.edu
>
> KIT -- University of the State of Baden-W├╝rttemberg and
> National Laboratory of the Helmholtz Association
> ________________________________
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio$ source
> /etc/profile.d/gnuradio.sh
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>

Have you sourced that profile.d/gnuradio file and/or rebooted since
creating it? Also, can you put the output of gnuradio's cmake on gist
or pastebin? You should be able to go in to gnuradio/build and run
`cmake ..`

-Nathan



reply via email to

[Prev in Thread] Current Thread [Next in Thread]