Re: [Discuss-gnuradio] Control Port, Perf Mon for GRC - errors

[Tom McDermott]

Hi Tim,  further .. captured the Cmake output and make outputs, scanning for the relevant parts..

Cmake  [snip]

--   package 'Ice-3.5' not found
-- ICE 3.5 not found. Looking for 3.4
--
-- Python checking for Ice >= 3.4
-- Python checking for Ice >= 3.4 - found
-- Ice-3.4 found
-- Found ICE: /usr/lib/libIce.so;/usr/lib/libIceUtil.so 
--
-- Configuring gr-ctrlport support...
--   Dependency Boost_FOUND = 1
--   Dependency SWIG_FOUND = TRUE
--   Dependency SWIG_VERSION_CHECK = TRUE
--   Dependency ICE_FOUND = TRUE
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Enabling gr-ctrlport support.
--   Override with -DENABLE_GR_CTRLPORT=ON/OFF

The beginning part of the make error [snip]

[  6%] Building CXX object gnuradio-runtime/lib/CMakeFiles/gnuradio-runtime.dir/controlport/ice_application_base.cc.o
In file included from /usr/include/Ice/LocalObjectF.h:15:0,
                 from /usr/include/Ice/CommunicatorF.h:24,
                 from /usr/include/Ice/Initialize.h:13,
                 from /usr/include/Ice/Ice.h:13,
                 from /home/tom/gnuradio/gnuradio-runtime/include/gnuradio/ice_application_base.h:33,
                 from /home/tom/gnuradio/gnuradio-runtime/lib/controlport/ice_application_base.cc:23:
/usr/include/Ice/Handle.h: In instantiation of ‘IceInternal::Handle<T>::Handle(T*) [with T = Ice::Communicator]’:
/usr/include/Ice/OutgoingAsync.h:49:16:   required from here
/usr/include/Ice/Handle.h:66:30: error: ‘upCast’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive]
             upCast(this->_ptr)->__incRef();
                              ^

Don't know if the additional information helps or not....

-- Tom, N5EG

---

From: Tom McDermott <address@hidden>
To: Tim Newman <address@hidden>
Cc: "address@hidden" <address@hidden>
Sent: Saturday, February 8, 2014 8:22 AM
Subject: Re: [Discuss-gnuradio] Control Port, Perf Mon for GRC - errors

Thanks, Tim.

Yes - I had installed zeroc-ice after building.

Now, I removed CMakeCache.txt and redid cmake ../ -DENABLE_PERFORMANCE_COUNTERS=On
which cmaked correctly.

Now when I run make, I am getting a large number of compile errors, enough to scroll off the terminal screen.
Here's the tail end of the make error:

/usr/include/c++/4.8/bits/stl_tree.h:1127:23:   required from ‘void std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_M_erase(std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_Link_type) [with _Key = int; _Val = std::pair<const int, IceInternal::Handle<Ice::Object> >; _KeyOfValue = std::_Select1st<std::pair<const int, IceInternal::Handle<Ice::Object> > >; _Compare = std::less<int>; _Alloc = std::allocator<std::pair<const int, IceInternal::Handle<Ice::Object> > >; std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::_Link_type = std::_Rb_tree_node<std::pair<const int, IceInternal::Handle<Ice::Object> > >*]’
/usr/include/c++/4.8/bits/stl_tree.h:671:28:   required from ‘std::_Rb_tree<_Key, _Val, _KeyOfValue, _Compare, _Alloc>::~_Rb_tree() [with _Key = int; _Val = std::pair<const int, IceInternal::Handle<Ice::Object> >; _KeyOfValue = std::_Select1st<std::pair<const int, IceInternal::Handle<Ice::Object> > >; _Compare = std::less<int>; _Alloc = std::allocator<std::pair<const int, IceInternal::Handle<Ice::Object> > >]’
/usr/include/c++/4.8/bits/stl_map.h:96:11:   required from here
/usr/include/Ice/Handle.h:106:30: error: ‘upCast’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive]
             upCast(this->_ptr)->__decRef();
                              ^
In file included from /usr/include/Ice/Ice.h:30:0,
                 from /home/tom/gnuradio/gnuradio-runtime/include/gnuradio/ice_application_base.h:33,
                 from /home/tom/gnuradio/gnuradio-runtime/lib/controlport/ice_application_base.cc:23:
/usr/include/Ice/Connection.h:92:29: note: ‘Ice::LocalObject* IceInternal::upCast(Ice::UDPConnectionInfo*)’ declared here, later in the translation unit
 ICE_API ::Ice::LocalObject* upCast(::Ice::UDPConnectionInfo*);
                             ^
make[2]: *** [gnuradio-runtime/lib/CMakeFiles/gnuradio-runtime.dir/controlport/ice_application_base.cc.o] Error 1
make[1]: *** [gnuradio-runtime/lib/CMakeFiles/gnuradio-runtime.dir/all] Error 2
make: *** [all] Error 2

---

From: Tim Newman <address@hidden>
To: Tom McDermott <address@hidden>
Cc: "address@hidden" <address@hidden>
Sent: Saturday, February 8, 2014 5:46 AM
Subject: Re: [Discuss-gnuradio] Control Port, Perf Mon for GRC - errors

Are you installing Ice after you build gnuradio?  If so, then gnuradio won't enable the controlport modules during the gnuradio build because it doesnt detect Ice.

Tim

On Fri, Feb 7, 2014 at 11:10 PM, Tom McDermott <address@hidden> wrote:

Having some issues with Control Port and Perf Mon in GRC.

1. Built Latest Gnuradio 3.7.2 from git.

    enabled performance counters in the cmake command line

    cmake ../ -DENABLE_PERFORMANCE_COUNTERS=On

    then successful make, install, ldconfig, and gnuradio runs fine.

2. Edited the  gnuradio-runtime-conf file to enable PerfCounters and

  ControlPort, Edges.

3. Installed zeroc-ice (ver 3.4).

If I add both a ControlPort Complex Probe and a CtrlPort Monitor, get the

following error:

Traceback (most recent call last):
  File "home/tom//mod_phasing_test.py", line 17, in <module>
    from gnuradio.ctrlport.monitor import *
ImportError: No module named ctrlport.monitor

If I delete the CtrlPort Monitor, leaving only the probe, I get the following error:

Traceback (most recent call last):
  File "/home/tom/mod_phasing_test.py", line 231, in <module>
    tb = mod_phasing_test()
  File "/home/tom/mod_phasing_test.py", line 144, in __init__
    self.blocks_ctrlport_probe_c_0 = blocks.ctrlport_probe_c("constellation", "Constellation Points")
AttributeError: 'module' object has no attribute 'ctrlport_probe_c'

Are there other configuration steps needed? Does zeroc-ice need to be configured in some manner?

-- Tom, N5EG

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio