[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] uhd_find_devices cannot find my B210
From: |
Greg Hulands |
Subject: |
Re: [Discuss-gnuradio] uhd_find_devices cannot find my B210 |
Date: |
Mon, 05 May 2014 11:13:02 -0700 |
I added the Ettus repo and installed 003.007.001 and yet when I run the
uhd_find_devices command it shows the 003.005.003 version.
Do you recommend building from source?
Thanks,
Greg
On May 5, 2014, at 10:58 AM, Marcus D. Leech <address@hidden> wrote:
> On 05/05/2014 01:52 PM, Greg Hulands wrote:
>> Hi,
>> I received my B210 this morning and when I run uhd_find_devices, it say it
>> can't find any devices.
>>
>> $ uhd_find_devices
>> linux; GNU C++ version 4.8.1; Boost_105300; UHD_003.005.003-0-unknown
>>
>> No UHD Devices Found
>>
>>
>> lsusb shows the device, but the product id is different to what is in
>> /lib/udev/rules.d/40-uhd-host.rules
>>
>> Bus 003 Device 006: ID 2500:0020
>>
>> So I added a line to the rules file
>> SUBSYSTEMS=="usb", ATTRS{idVendor}=="2500", ATTRS{idProduct}=="0020",
>> GROUP:="usrp", MODE:="0660"
>>
>> I reloaded udev, unplugged and replugged in the device, but still
>> uhd_find_devices can't locate it.
>>
>> I have the B210 plugged into a Via VL800 USB 3.0 card. lspci identifies it
>> as Device 3483 (rev 01).
>>
>> What step am i missing?
>>
>> Thanks,
>> Greg
>>
>>
>>
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
> You need to most recent version of UHD. Support for B210 was introduced at
> 3.5.4 of UHD, and if you're going to upgrade, you should upgrade to
> the latest.
>
>
>
> --
> Marcus Leech
> Principal Investigator
> Shirleys Bay Radio Astronomy Consortium
> http://www.sbrac.org
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
signature.asc
Description: Message signed with OpenPGP using GPGMail