[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] reset() for probe_avg_mag_sqrd

From: Martin Braun
Subject: Re: [Discuss-gnuradio] reset() for probe_avg_mag_sqrd
Date: Mon, 04 Aug 2014 11:05:03 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0


this might be useful, can you post an issue on gnuradio.org, and
describe as clearly as possible what you need? A patch, even if small,
also helps to make things clearer for us.


On 08/02/2014 07:50 PM, Stefan Oltmanns wrote:
> Hello,
> my application is monitoring the RF level and often changeing the
> frequency. Unfortunately it takes some time for probe_avg_mag_sqrd to
> adjust to the new RF level (about 2 seconds if old level -10dB and new
> level -40dB).
> I found out the the iir-filter probe_avg_mag_sqrd uses has a reset
> function, so all I did was adding a reset-function in probe_avg_mag_sqrd
> to call it and it seems so work fine.
> Is there any reason probe_avg_mag_sqrd doesn´t have a reset function
> yet? Is there some problem I don´t see?
> In case not, could that be added in official GNURadio? Otherwise my
> application would only work with modified GNURadio (or I would need to
> include my modified probe_avg_mag_sqrd with a new name in my
> appliaction). I would prefer to have this feature in official GNURadio,
> as it´s probably useful for somebody else as well.
> Best regards
> Stefan
> Note: I´m not sending a patch because it´s just 3 lines of code and I
> don´t know Python, so somebody else would have to complete it anyway.
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]