[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] sample rate

From: xianda
Subject: Re: [Discuss-gnuradio] sample rate
Date: Mon, 6 Oct 2014 17:17:26 +0800 (CST)

Hi Martin:
               Thank you so much.I understand.
Best regards,

At 2014-10-06 17:11:18, "Martin Braun" <address@hidden> wrote: >The question is ill-formed, the concept of a 'sampling rate' does not >really apply here. > >However, to an item rate, you can do the math yourself: > >Assume N is the FFT length, and CP the length of cyclic prefix in >samples. r is the incoming sampling rate. > >First, data goes through the HPD, which takes out the CP. The outgoing >rate of that block is thus > >r2 = (N+CP)/N * r > >Actually, it's output is already OFDM symbols ("FFT-ready"). So, the >output item rate is > >r3 = r2/N > >Then, the packet header is removed. This further reduces the rate, but >let's ignore that. It's also dependent on the packet length. > >Since the FFT doesn't change the rate, what you want is most likely r3. > >M > > >On 10/06/2014 10:36 AM, xianda wrote: >> Hi all: >> Thanks in advance. >> Example:gnuradio/gr-digital/examples/ofdm/rx_ofdm.grc. >> If I set the sample rate of usrp equal to 1Msps,then what is >> the sample rate of the output of the FFT block?Thank you very much. >> Best regards, >> xd > > >_______________________________________________ >Discuss-gnuradio mailing list >address@hidden >https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]