[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] How to access UHD from within my own OOT block?

From: Simone Ciccia S210664
Subject: Re: [Discuss-gnuradio] How to access UHD from within my own OOT block?
Date: Thu, 09 Oct 2014 10:16:36 +0200
User-agent: RoundCube Webmail/0.2.1

Hi Jeroen,
here a link where there is an example about how to use UHD class.
go in section "Detailed description".
Give me a feedback if you are able to use this class in our own block.

On Wed, 8 Oct 2014 14:01:39 +0000, "Boschma, J.J. (Jeroen)"
<address@hidden> wrote:
> Dear all,
> In the Companion GUI I use the UHD source- and sink-blocks, together with
> my own OOT blocks. Now I want to control the UHD blocks from within my
> blocks, for example changing the center frequency. So in my own block I
> would like to write something like:
>     usrp->set_center_freq(whatever);
> I there an easy interface/API available to do this? Or do I have to
> download the gr-uhd, modify it (maybe add a method to get a pointer to
> USRP out of it?) and rebuild? Unfortunately I just could not find a
> starting point yet.
> Regards,
>       Jeroen
> Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u
> niet de geadresseerde bent of dit bericht abusievelijk aan u is
> toegezonden, wordt u verzocht dat aan de afzender te melden en het
> te verwijderen. TNO aanvaardt geen aansprakelijkheid voor de inhoud van
> deze e-mail, de wijze waarop u deze gebruikt en voor schade, van welke
> aard ook, die verband houdt met risico's verbonden aan het elektronisch
> verzenden van berichten.
> This message may contain information that is not intended for you. If you
> are not the addressee or if this message was sent to you by mistake, you
> are requested to inform the sender and delete the message. TNO accepts no
> liability for the content of this e-mail, for the manner in which you use
> it and for damage of any kind resulting from the risks inherent to the
> electronic transmission of messages.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]