|Subject:||Re: [Discuss-gnuradio] Works with GR 3.6, breaks with 3.7|
|Date:||Thu, 16 Oct 2014 23:28:28 -0700|
I just tried doing a complete PyBombs reinstall and that didn't seem the help. I checked and simple GRC files run fine. I can also see the signal where I expect it to be in GQRX, so I think my tuning parameters are correct.Are there some other things I should try?
Sent from my iPhone
On Oct 13, 2014, at 1:38 PM, Luke Berndt <address@hidden> wrote:I have a GnuRadio C++ program that decodes and records a SmartNet Trunked radio system. It is running great under GnuRadio 18.104.22.168, but it doesn’t seem to be working under 22.214.171.124.6 is installed in /usr/local and 3.7.6 was installed in my home directory using PyBombs. My updated program compiles against 3.7 with no problem and runs. It will pick up a few of the trunking commands, so it is working, but the ratios is about 1 to 100 compared to 3.6. I also tried running it in a Ubuntu VM with 3.7 installed at /usr/local and had the same results.I corrected for the change with XlatingFirFilter in 3.7, so it is the opposite offset of 3.6. It looks like it could be a tuning error though, the flow graph seems to be failing mostly at the CRC check. Did anything else change with Blocks in 3.7? I looked at gr-osmosdr but I didn’t notice huge discrepancies between the 3.6 and 3.7 branches.Are there some obvious things I could be missing? I feel like this is something small and stupid that I missing.The diff between the two versions is here, smartness.cc is the main file that decodes the control channel. As you can see, there is not that much different:https://github.com/robotastic/smartnet-recorder/compare/master...3.7-Update#diff-73510702485a7dd2f7000285cbd5e557R40Here is the central code block that does it. Anything obviously dumb here?float samples_per_second = samp_rate;float syms_per_sec = 3600;float gain_mu = 0.01;float mu=0.5;float omega_relative_limit = 0.3;float offset = chan_freq - center_freq; // have to reverse it for 3.7 because it swapped in the switch.float clockrec_oversample = 3;int decim = int(samples_per_second / (syms_per_sec * clockrec_oversample));float sps = samples_per_second/decim/syms_per_sec;const double pi = boost::math::constants::pi<double>();cout << "Control channel offset: " << offset << endl;cout << "Decim: " << decim << endl;cout << "Samples per symbol: " << sps << endl;std::vector<float> lpf_taps;init_loggers(max_loggers, center_freq, samp_rate);gr::msg_queue::sptr queue = gr::msg_queue::make();lpf_taps = gr::filter::firdes::low_pass(1, samp_rate, 10000, 12000);gr::filter::freq_xlating_fir_filter_ccf::sptr prefilter = gr::filter::freq_xlating_fir_filter_ccf::make(decim,lpf_taps,offset,samp_rate);gr::digital::fll_band_edge_cc::sptr carriertrack = gr::digital::fll_band_edge_cc::make(sps, 0.6, 64, 0.35);gr::analog::pll_freqdet_cf::sptr pll_demod = gr::analog::pll_freqdet_cf::make(2.0 / clockrec_oversample, 2*pi/clockrec_oversample, -2*pi/clockrec_oversample);gr::digital::clock_recovery_mm_ff::sptr softbits = gr::digital::clock_recovery_mm_ff::make(sps, 0.25 * gain_mu * gain_mu, mu, gain_mu, omega_relative_limit);gr::digital::binary_slicer_fb::sptr slicer = gr::digital::binary_slicer_fb::make();gr::digital::correlate_access_code_tag_bb::sptr start_correlator = gr::digital::correlate_access_code_tag_bb::make("10101100",0,"smartnet_preamble");smartnet_deinterleave_sptr deinterleave = smartnet_make_deinterleave();smartnet_crc_sptr crc = smartnet_make_crc(queue);tb->connect(src,0,prefilter,0);tb->connect(prefilter,0,carriertrack,0);tb->connect(carriertrack, 0, pll_demod, 0);tb->connect(pll_demod, 0, softbits, 0);tb->connect(softbits, 0, slicer, 0);tb->connect(slicer, 0, start_correlator, 0);tb->connect(start_correlator, 0, deinterleave, 0);tb->connect(deinterleave, 0, crc, 0);tb->start();
Discuss-gnuradio mailing list
|[Prev in Thread]||Current Thread||[Next in Thread]|