[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Building a Zedboard BOOT.bin

From: Philip Balister
Subject: Re: [Discuss-gnuradio] Building a Zedboard BOOT.bin
Date: Fri, 24 Oct 2014 10:00:27 -0400
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.1.1

On 10/23/2014 10:20 AM, Daniel Camara wrote:
>  Hi,
>   I am trying to generate a bootable SD card for the zedboard and I am
> running over some small issues. For starters, do you provide the u-boot.elf
> you use somewhere? In the http://gnuradio.org/data/sdk/zedboard_armv7a-hf-
> vfp-neon/ there is only the uboot.bin, but the boot.bif at zynq-acp/top/
> zedboard/boot requires the .elf.
>   I tried to build everything as described in the "Building the Linux
> Kernel, U-Boot, & Root Filesystem with OpenEmbedded" section but then... I
> run into  MANY issues  building it, (really many,  I am writing down
> everything and, if I manage to do it fully one day, I already promised I
> will  contact the write all the issues and I will try to contact the
> responsible for the module to share my findings, it may help the next
> people :). For the moment I got stuck at:

Do you have a link to the instructions you are using?


> ....
> configure:18748: error: in `..../oe-repo/build/tmp-eglibc/work/armv7a-vfp
> -neon-oe-linux-gnueabi/libxt/1_1.1.4-r0/libXt-1.1.4':
> configure:18750: error: The pkg-config script could not be found or is too
> old.  Make sure it
> is in your PATH or set the PKG_CONFIG environment variable to the full
> path to pkg-config.
> Alternatively, you may set the environment variables XT_CFLAGS
> and XT_LIBS to avoid the need to call pkg-config.
> See the pkg-config man page for more details.
> To get pkg-config, see <http://pkg-config.freedesktop.org/>.
> See `config.log' for more details
> ....
> ac_cv_env_PKG_CONFIG_LIBDIR_set=set
> ac_cv_env_PKG_CONFIG_LIBDIR_value=..../oe-repo/build/tmp-eglibc/sysroots/
> zedboard-zynq7/usr/lib/pkgconfig
> ac_cv_env_PKG_CONFIG_PATH_set=set
> ac_cv_env_PKG_CONFIG_PATH_value=..../oe-repo/build/tmp-eglibc/sysroots/
> zedboard-zynq7/usr/lib/pkgconfig:.../oe-repo/build/tmp-eglibc/sysroots/
> zedboard-zynq7/usr/share/pkgconfig
> ac_cv_env_PKG_CONFIG_set=
> ac_cv_env_PKG_CONFIG_value=
> .....
> | ERROR: Function failed: do_configure (log file is located at ..../oe-repo
> /build/tmp-eglibc/work/armv7a-vfp-neon-oe-linux-gnueabi/libxt
> /1_1.1.4-r0/temp/log.do_configure.19545)
> ERROR: Task 3409 (.../oe-repo/oe-core/meta/recipes-graphics/xorg-lib/libxt
> _1.1.4.bb, do_configure) failed with exit code '1'
> -------
>   Any ideas? I looked into the libxt_1.1.4.bb to see what I could change...
> but as  I never used bitbake nor have I ever create a recipe... I am afraid
> of breaking something if I just disable it.
>   By the way, is there any chance some one will try to adapt the ISE
> scripts to vivado? The XPS tool, used in the scripts, does not exist
> anymore :(. I installed  the evaluation version to create the fsbl.. but I
> guess more and more people will run over this problem of compatibility of
> the present scripts with the new version of the Xilinx tools.
>    Best regards...
>           Daniel
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]