[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Building BOOT.BIN for Zedboard to use with gnurad

From: Nick Foster
Subject: Re: [Discuss-gnuradio] Building BOOT.BIN for Zedboard to use with gnuradio-dev-image
Date: Tue, 9 Dec 2014 09:16:15 -0800

A number of different distributions include a u-boot.elf suitable for the Zedboard. I'm not a linux boot expert, but u-boot seems pretty platform-agnostic when paired with a suitable FSBL.

The images here include a u-boot.elf that works with Zedboard, ZC702, ZC706, etc.

Email me directly and I'll just send you the .elf if you're interested.


On Tue, Dec 9, 2014 at 7:27 AM, Nowlan, Sean <address@hidden> wrote:

I’d like to use the gnuradio openembedded SDK and image that are available here [1] to reproduce the work here [2] without building my own openembedded image. I’m having trouble getting a working boot.bin for Zedboard without doing a full openembedded build. I know that there are licensing issues that may prohibit distributing an FSBL file, but I’ve gone ahead and done that using the directions in [2]. I’d like to compile boot.bin with the zynq_fsbl.bit I created with Xilinx 14.6, uImage, and the device tree binary distributed in [1]. However, in order to use the build script in zynq-acp, I need u-boot.elf, and [1] only provides u-boot.bin. Is there another way to compile these without doing a full openembedded build?


[1]          http://gnuradio.org/data/sdk/zedboard_armv7a-sf-vfp-neon/

[2]          http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq




Discuss-gnuradio mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]