[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] GNU blocks

From: Marcus Müller
Subject: Re: [Discuss-gnuradio] GNU blocks
Date: Wed, 10 Dec 2014 13:20:36 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.2.0

Hello Siva Kuma Reddy,

if you need the UHD blocks, you will need to install UHD before
building GNU Radio. Please install UHD as explained on [1], and make
sure that you *do not* install any libuhd packets that Ubuntu has
(these are very outdated).

The signal source block should be there, if you were successful in
building GNU Radio. However, when you do the "cmake ../" step, you
will get a long output, explaining which components of GNU Radio will
be built, and if they are not, which dependencies are missing.

Best regards,
Marcus Müller


On 12/10/2014 12:49 PM, sivakumar reddy wrote:
> I installed by the following link
> http://gnuradio.org/redmine/projects/gnuradio/wiki/UbuntuInstall#Precise-Pangolin-1204
> when I used
> git clone http://gnuradio.org/git/gnuradio.git
> it automatically installed gnuradio 3.7.6 version
> But most of the blocks were missed in the GNU user interface like
> UHD, OFDM, Source signals,...etc. Please give me solution to get
> all the blocks which are missed.
> Thanks & Regards *B. Siva Kumar Reddy*
> *Research Scholar* *Department of ECE* *National Institute of
> Technology Warangal (NITW)* *Andhra Pradesh, India-506004* 
> *09948065756 *
> _______________________________________________ Discuss-gnuradio
> mailing list address@hidden 
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]