[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Changing the IP of USRP2

From: vaibhav kulkarni
Subject: [Discuss-gnuradio] Changing the IP of USRP2
Date: Fri, 23 Jan 2015 17:26:39 +0100

Hi All, 

I am a newbee to grc and USRP. I need some help regarding changing the IP address of the USRP. I checked the previous threads on this discussion and searched a bit to do this, but couldn't get it working. 

My host PC IP is

My USRP1's IP is

My USRP2's IP is Currently. I want to set this IP to

I disconnected USRP1 and tried this command 
sudo ./usrp2_recovery.py --ifc=eth0 --new-ip=

The output is 

('Opening raw socket on interface:', 'eth0')
('Loading packet with ip address:', '')
Sending packet (22 bytes)

I removed the power source and connected it back and tried to ping the new IP, I dont get any reply. Also I tried uhd_find_devices but It shows the same old IP 

I tried the second approach
./usrp_burn_mb_eeprom --args= --key=ip-addr --val=

I get this as the output:
./usrp_burn_mb_eeprom: symbol lookup error: ./usrp_burn_mb_eeprom: undefined symbol: _ZN3uhd6device4makeERKNS_13device_addr_tEm

Can some1 help me understand whats happening here ? I appreciate the help. 


reply via email to

[Prev in Thread] Current Thread [Next in Thread]