[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] USRP B200 host BW with USB 3.0/2.0

From: Jorge Gallo
Subject: Re: [Discuss-gnuradio] USRP B200 host BW with USB 3.0/2.0
Date: Thu, 29 Jan 2015 16:07:19 +0100


The alternative of a USB 3.0 is not having 5 USRPs. It is just reading 5 times at different centrer frequencies in order to get 40MHz information although that information will not be gathered at the same time.

For my application I just need to "see" the sprectrum. I do not need to demodulate data so that it would be fine to proceed that way. However i would rather get 40MHz in a row.

Many thanks, 

On 29 January 2015 at 14:07, Martin Braun <address@hidden> wrote:
On 01/29/2015 01:48 PM, Jorge Gallo wrote:
> I understand the given values of host bandwidth for each protocol:
> USB 2.0                  8 (MS/s @ 16-bit I/Q)

If you go down to 8-bit I&Q, you will get twice that amount, if that's
any help.

> USB 3.0                61.44 (MS/s @ 16-bit I/Q)
> However I would like to process 40MHz of analogue BW in GNURadio over
> USB 2.0
> I fully understand  a continuous reception is not possible to manage
> since it would require 40 IQ MS/s and I am limited to 8MS/s.
> However, is it possible to take snapshots of 40MHz over the time so that
> I am able to receive bits of 40MHz with USB 2.0 which are not continuous
> in time?
> Are there buffers in the FPGA that manage this kind of operation?

None big enough for anything useful.

It seems like attaching a USB3.0 connector would be simpler than running
5 USRPs? Not that I would complain about the sales :)


Discuss-gnuradio mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]