[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] uhd_fft segfault
From: |
Martin Braun |
Subject: |
Re: [Discuss-gnuradio] uhd_fft segfault |
Date: |
Mon, 16 Feb 2015 21:39:38 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.4.0 |
Those swig traces are hard to parse, but you might have to rebuild GNU
Radio against the current UHD build. Did you install both via Pybombs?
M
On 02/16/2015 09:09 PM, Ergeerts Glenn wrote:
> Hi,
>
> I'm new to SDR and gnuradio and trying to get started with an USRP B200
> and gnuradio on ubuntu 14.04.
> I'm using pybombs (up-to-date) for building. Building succeeds but i get
> a segfault when running uhd_fft.
> The backtrace is below.
>
> I checked if the correct libuhd was being used (with ldd),instead of an
> old version from an ubuntu package.
> I also tried uhd_find_devices (which uses pure uhd if i'm correct,
> without gnuradio?), this works fine.
> Running "pybombs verify gnuradio" results in:
> The following tests FAILED:
> 183 - qa_uhd (Failed)
> 192 - qa_fcd (Failed)
> Errors while running CT
>
> Running gnuradio/gr-uhd/python/uhd/qa_uhd.py in gdb segfaults with a
> similar backtrace as well.
> Finally, i tried changing the gnuradio recipe to use the maint branch
> instead of master.
> Rebuilding (after cleaning the build dir) results in the same situation
> however.
>
> I don't know where to look next. Did anyone experience the same problem?
> Thanks for any pointers!
>
>
> (gdb) bt
> #0 0x000000000001e626 in ?? ()
> #1 0x00007ffff079d3a0 in strstr (__needle=0x7ffff082bfca "swig_ptr: ",
> __haystack=0xd9398 <error: Cannot access memory at address 0xd9398>) at
> /usr/include/string.h:337
> #2 SWIG_Python_FixMethods (methods=0x7ffff0a57380 <SwigMethods>,
> const_table=0x7ffff0a5d920 <swig_const_table>, types=0x7ffff0a5d980
> <swig_types>,
> types_initial=0x7ffff0a55a20 <swig_type_initial>) at
> /home/glenn/projects/pybombs/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:47200
> #3 init_uhd_swig () at
> /home/glenn/projects/pybombs/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:47321
> #4 0x00000000004268bc in _PyImport_LoadDynamicModule
> (name=0x7ffff1cccd74 "_uhd_swig",
> pathname=0x7fffed3fa48c
> "/home/glenn/bin/gnuradio/lib/python2.7/dist-packages/gnuradio/uhd/_uhd_swig.so",
>
> fp=<optimized out>) at ../Python/importdl.c:53
> #5 0x00000000005b75d1 in load_module.39237 (name=<optimized out>,
> fp=<optimized out>, pathname=<optimized out>, type=<optimized out>,
> address@hidden)
> at ../Python/import.c:1915
> #6 0x000000000046232a in imp_load_module.39244 (self=<optimized out>,
> args=<optimized out>) at ../Python/import.c:3182
> #7 0x000000000052c6d5 in call_function (oparg=<optimized out>,
> pp_stack=0x7fffffffc170) at ../Python/ceval.c:4020
> #8 PyEval_EvalFrameEx (address@hidden
> Frame 0x7ffff2182a50, for file
> /home/glenn/bin/gnuradio/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py,
>
> line 24, in swig_import_helper (dirname=<function at remote
> 0x7ffff7f0f578>, imp=<module at remote 0x7ffff6b519f0>, fp=<file at
> remote 0x7ffff0aa1f60>,
> pathname='/home/glenn/bin/gnuradio/lib/python2.7/dist-packages/gnuradio/uhd/_uhd_swig.so',
>
> description=('.so', 'rb', 3)), address@hidden) at
> ../Python/ceval.c:2666
> #9 0x000000000052cf32 in fast_function (nk=<optimized out>,
> na=<optimized out>, n=0, pp_stack=0x7fffffffc2b0, func=<function at
> remote 0x7fffed3fa398>)
> at ../Python/ceval.c:4106
> #10 call_function (oparg=<optimized out>, pp_stack=0x7fffffffc2b0) at
> ../Python/ceval.c:4041
> #11 PyEval_EvalFrameEx (address@hidden 0x7ffff1c73b00, for file
> /home/glenn/bin/gnuradio/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py,
>
> line 28, in <module> (),
> address@hidden) at ../Python/ceval.c:2666
> #12 0x000000000055c594 in PyEval_EvalCodeEx (co=0x7fffed40a9b0,
> globals=<optimized out>, locals=<optimized out>, args=<optimized out>,
> argcount=<optimized out>,
> kws=<optimized out>, kwcount=0, defs=0x0, defcount=0, closure=0x0)
> at ../Python/ceval.c:3252
> #13 0x00000000005b7392 in PyEval_EvalCode (co=<optimized out>,
> globals=<optimized out>, locals=<optimized out>) at ../Python/ceval.c:667
> #14 0x00000000005b744a in PyImport_ExecCodeModuleEx
> (address@hidden "gnuradio.uhd.uhd_swig", address@hidden<code at
> remote 0x7fffed40a9b0>,
> address@hidden
> "/home/glenn/bin/gnuradio/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.pyc")
>
> at ../Python/import.c:709
> #15 0x0000000000579f0f in load_source_module.39194
> (address@hidden "gnuradio.uhd.uhd_swig",
> pathname=0xa0f170
> "/home/glenn/bin/gnuradio/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.pyc",
>
>
> address@hidden
> "/home/glenn/bin/gnuradio/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py",
>
> fp=<optimized out>) at ../Python/import.c:1099
> #16 0x00000000005b7541 in load_module.39237 (address@hidden
> "gnuradio.uhd.uhd_swig", fp=<optimized out>,
> address@hidden
> "/home/glenn/bin/gnuradio/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py",
>
> type=<optimized out>, loader=<optimized out>)
> at ../Python/import.c:1906
> #17 0x000000000055d3a3 in import_submodule.39248 (address@hidden<module
> at remote 0x7ffff1c8aa98>, address@hidden "uhd_swig",
> fullname=0xdf9060 "gnuradio.uhd.uhd_swig") at ../Python/import.c:2700
> #18 0x000000000055d77c in load_next (mod=<module at remote
> 0x7ffff1c8aa98>, altmod=None, address@hidden,
> address@hidden "gnuradio.uhd.uhd_swig",
> address@hidden) at ../Python/import.c:2515
> #19 0x000000000055db37 in import_module_level.isra.3 (level=-1,
> fromlist=None, globals=<optimized out>, name=0x0) at ../Python/import.c:2224
> #20 PyImport_ImportModuleLevel (name=<optimized out>, globals=<optimized
> out>, locals=<optimized out>, fromlist=None, level=-1) at
> ../Python/import.c:2288
> #21 0x00000000004755e7 in builtin___import__.32997 (self=<optimized
> out>, args=<optimized out>, kwds=<optimized out>) at
> ../Python/bltinmodule.c:49
> #22 0x00000000004da20b in PyObject_Call (kw=0x0,
> arg=('uhd_swig', {'_prepare_uhd_swig': <function at remote
> 0x7ffff0adf2a8>, '__builtins__': {'bytearray': <type at remote
> 0x9166a0>, 'IndexError': <type at remote 0x919900>, 'all': <built-in
> function all>, 'help': <_Helper at remote 0x7ffff7e7d290>, 'vars':
> <built-in function vars>, 'SyntaxError': <type at remote 0x91b9e0>,
> 'unicode': <type at remote 0x91dc80>, 'UnicodeDecodeError': <type at
> remote 0x91a920>, 'memoryview': <type at remote 0x90dae0>, 'isinstance':
> <built-in function isinstance>, 'copyright':
> <_Printer(_Printer__data='Copyright (c) 2001-2014 Python Software
> Foundation.\nAll Rights Reserved.\n\nCopyright (c) 2000 BeOpen.com.\nAll
> Rights Reserved.\n\nCopyright (c) 1995-2001 Corporation for National
> Research Initiatives.\nAll Rights Reserved.\n\nCopyright (c) 1991-1995
> Stichting Mathematisch Centrum, Amsterdam.\nAll Rights Reserved.',
> _Printer__lines=None, _Printer__name='copyright', _Printer__dirs=(),
> _Printer__files=(...)) at remote 0x7ffff7e7d590>, 'NameError': <type at
> remote 0x91bd20>, 'BytesWarn...(truncated), func=<built-in function
> __import__>) at ../Objects/abstract.c:2529
> #23 PyEval_CallObjectWithKeywords (address@hidden<built-in function
> __import__>,
> address@hidden('uhd_swig', {'_prepare_uhd_swig': <function at
> remote 0x7ffff0adf2a8>, '__builtins__': {'bytearray': <type at remote
> 0x9166a0>, 'IndexError': <type at remote 0x919900>, 'all': <built-in
> function all>, 'help': <_Helper at remote 0x7ffff7e7d290>, 'vars':
> <built-in function vars>, 'SyntaxError': <type at remote 0x91b9e0>,
> 'unicode': <type at remote 0x91dc80>, 'UnicodeDecodeError': <type at
> remote 0x91a920>, 'memoryview': <type at remote 0x90dae0>, 'isinstance':
> <built-in function isinstance>, 'copyright':
> <_Printer(_Printer__data='Copyright (c) 2001-2014 Python Software
> Foundation.\nAll Rights Reserved.\n\nCopyright (c) 2000 BeOpen.com.\nAll
> Rights Reserved.\n\nCopyright (c) 1995-2001 Corporation for National
> Research Initiatives.\nAll Rights Reserved.\n\nCopyright (c) 1991-1995
> Stichting Mathematisch Centrum, Amsterdam.\nAll Rights Reserved.',
> _Printer__lines=None, _Printer__name='copyright', _Printer__dirs=(),
> _Printer__files=(...)) at remote 0x7ffff7e7d590>, 'NameError': <type at
> remote
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
- [Discuss-gnuradio] uhd_fft segfault, Ergeerts Glenn, 2015/02/16
- Re: [Discuss-gnuradio] uhd_fft segfault,
Martin Braun <=
- Re: [Discuss-gnuradio] uhd_fft segfault, Ergeerts Glenn, 2015/02/16
- Re: [Discuss-gnuradio] uhd_fft segfault, Richard Bell, 2015/02/16
- Re: [Discuss-gnuradio] uhd_fft segfault, Ergeerts Glenn, 2015/02/17
- Re: [Discuss-gnuradio] uhd_fft segfault, Tom Rondeau, 2015/02/17
- Re: [Discuss-gnuradio] uhd_fft segfault, Marcus D. Leech, 2015/02/17
- Re: [Discuss-gnuradio] uhd_fft segfault, Ergeerts Glenn, 2015/02/17