[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] GNU Radio on Zedboard

From: Philip Balister
Subject: Re: [Discuss-gnuradio] GNU Radio on Zedboard
Date: Fri, 13 Mar 2015 14:22:37 -0400
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.5.0

On 03/13/2015 01:17 PM, Alireza Khodamoradi wrote:
> Hello everyone,
> I'm going through the instructions from here:
> http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq

I should go over those carefully, but in the mentime I have some images
built for the zedbaord here:


Take the zedboard one, uncompress it and write it to an sd card. Be sure
to unmount (not eject) the sd card and run:

sudo dd if=sdimage-8G-zedboard.direct of=/dev/sdX

where sdx is the device the sd card is on.


> to get a working image with gnu radio for my zedboard.
> Unfortunately I can't get the board to boot with this image. I was
> wondering if someone can help me.
> what I tried so far ( all failed - can't boot from the SDCard):
> - default settings in the instructions
> - renaming u-boot.bin to boot.bin
> - renaming u-boot.bin to BOOT.BIN
> - renaming uImage--zedboard-zynq7.dtb to devicetree.dtb
> - I tried command line as well as gparted gui.
> what I checked:
> - download a linux from XillyBus and boot the board with SDCard -> works
> v/r
> Alireza
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]