[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Top-block does not find Probe Signal block

From: Alejandro Pascual Laguna
Subject: [Discuss-gnuradio] Top-block does not find Probe Signal block
Date: Fri, 3 Apr 2015 22:54:27 +0000

Hello GNUR's!

I am currently working with a SDR dongle which I want to lock at four different frequencies to see four consecutive parts of the spectrum. I have to do so because the sampling rate is not enough (2.4 MHz) to see at one glance the bandwidth I need (8 MHz). To achieve so I am multiplexing the values I want to lock my dongle to but I am getting some errors using the pair of blocks "Probe Signal" and "Function Probe" (see the flowgraph in [1] and errors trace [2]). By enabling/disabling some blocks I have guessed that the error about the overflow is caused by the WX GUI Number Sink, while the error of the non-existing attribute appears when I make use of the "variable" defined by the block Function Probe.

Of course I have followed the tutorial [3] and still couldn't make it to work.
Thank you very much in advance.


[1] http://imagizer.imageshack.us/a/img673/6338/mw0don.png
[2] http://pastebin.com/Kmxyw250
[3] https://gnuradio.org/redmine/projects/gnuradio/wiki/Guided_Tutorial_GRC/61#241-Examining-the-Probe-Signal-Block

reply via email to

[Prev in Thread] Current Thread [Next in Thread]