[Discuss-gnuradio] BER performance of gmsk

[Damon]

Hi everyone,

I am testing the BER performance of the gmsk of GNURaido with two USRP, one as a transmitter, and another as a receiver.
I find that the error bits would cause the subsequent bits getting error.
The received bits are compared with the transmitted bits, and if one bit is received correctly, a '0' is marked at the position, otherwise a '1' marked. 
In the following test result, the front part of bits are received correctly. But I get lots of error bits after some bit which is not received correctly.
...00000000000000000000000000000000000000000000000000000000010010110110001001110010100010...
How to explain this?

Best regards,
Damon