discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] usrp->get_rx_sensor_names() @ettus-b210 and ettus


From: Daniele Disco
Subject: Re: [Discuss-gnuradio] usrp->get_rx_sensor_names() @ettus-b210 and ettus-E310
Date: Mon, 9 Nov 2015 06:44:11 -0700 (MST)

I tried to use http://files.ettus.com/e3xx_images/e310-release-002/oecore-x86_64-armv7ahf-vfp-neon-toolchain-nodistro.0.sh 

 

But during the execution of cmake –DCMAKE_TOOLCHAIN_FILE=etc. etc. etc.

The procedure fails because in this case the sw does not found  make

(Python checking for Mako templates 0.4 or geater – “import mako” faild)

And the Makefile is not built.

 

BR

Daniele

 

 

_____________________________________________

Telecom Italia | TIM

Daniele Disco
Engeenering & Tilab – Wireless Access
Wireless Innovation
Via Reiss Romoli, 274 – 10148 Torino
tel . +39 011 228 7271
cell. +39 331 600 1113

Fax. +39 06 4186 5196
Tim Official: Facebook - Twitter
www.tim.it

 

From: Marcus Müller-3 [via GnuRadio] [mailto:ml-node+[hidden email]]
Sent: lunedì 9 novembre 2015 11:31
To: Disco Daniele
Subject: Re: usrp->get_rx_sensor_names() @ettus-b210 and ettus-E310

 

Hi Daniele,

that's a crash. I'm including usrp-users (because this is not inherently
related to GNU Radio, that might be the best place to discuss this);
follow up on either list, as you deem correct.

so, get_rx_sensor_names seems to crash. Hm; as I don't have an E310
right at hand, I can only read the source code, and from that, I'm not
quite sure why UHD would fail to find the rx frontend tree it tries to
access in get_rx_sensor_names. First sanity check: the version of UHD
you used to cross-compile is the same as running on the E310, right?

I think this might be easiest to debug if you did the two things:

on your PC with B210:
uhd_usrp_probe --tree > b210.property_tree.txt
on your E310:
uhd_usrp_probe --tree > e310.property_tree.txt

and share both files.

Best regards,
Marcus


On 09.11.2015 09:41, Daniele Disco wrote:


> The error is "Segmentation fault"
>
>
>
> --
> View this message in context: http://gnuradio.4.n7.nabble.com/usrp-get-rx-sensor-names-ettus-b210-and-ettus-E310-tp56815p56818.html
> Sent from the GnuRadio mailing list archive at Nabble.com.
>
> _______________________________________________
> Discuss-gnuradio mailing list
> [hidden email]
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio



_______________________________________________
Discuss-gnuradio mailing list
[hidden email]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio


If you reply to this email, your message will be added to the discussion below:

http://gnuradio.4.n7.nabble.com/usrp-get-rx-sensor-names-ettus-b210-and-ettus-E310-tp56815p56822.html

To unsubscribe from usrp->get_rx_sensor_names() @ettus-b210 and ettus-E310, click here.
NAML

Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle persone indicate. La diffusione, copia o qualsiasi altra azione derivante dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora abbiate ricevuto questo documento per errore siete cortesemente pregati di darne immediata comunicazione al mittente e di provvedere alla sua distruzione, Grazie.

This e-mail and any attachments is confidential and may contain privileged information intended for the addressee(s) only. Dissemination, copying, printing or use by anybody else is unauthorised. If you are not the intended recipient, please delete this message and any attachments and advise the sender by return e-mail, Thanks.

rispetta l'ambienteRispetta l'ambiente. Non stampare questa mail se non è necessario.



View this message in context: RE: usrp->get_rx_sensor_names() @ettus-b210 and ettus-E310
Sent from the GnuRadio mailing list archive at Nabble.com.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]