|
| From: | Sumit Saluja |
| Subject: | Re: [Discuss-gnuradio] Gnuradio-companion |
| Date: | Wed, 18 Nov 2015 22:43:36 +0000 |
|
Please see the logs with -v option
./build-gnuradio -v This script will install Gnu Radio from current GIT sources You will require Internet access from the computer on which this script runs. You will also require SUDO access. You will require approximately 500MB of free disk space to perform the build. This script will, as a side-effect, remove any existing Gnu Radio installation that was installed from your Linux distribution packages. It must do this to prevent problems due to interference between a linux-distribution-installed Gnu Radio/UHD and one installed from GIT source. The whole process may take up to two hours to complete, depending on the capabilities of your system. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! NOTE: if you run into problems while running this script, you can re-run it with the --verbose option to produce lots of diagnostic output to help debug problems. This script has been written to anticipate some of the more common problems one might encounter building ANY large, complex software package. But it is not pefect, and there are certainly some situations it could encounter that it cannot deal with gracefully. Altering the system configuration from something reasonably standard, removing parts of the filesystem, moving system libraries around arbitrarily, etc, it likely cannot cope with. It is just a script. It isn't intuitive or artificially intelligent. It tries to make life a little easier for you, but at the end of the day if it runs into trouble, a certain amount of knowledge on your part about system configuration and idiosyncrasies will inevitably be necessary. Proceed?yes Starting all functions at: Wed Nov 18 17:38:05 EST 2015 SUDO privileges are required Do you have SUDO privileges?yes Continuing with script ./build-gnuradio: line 1410: [: 90 90 90 90 90 90 90 90 90 90: integer _expression_ expected Installing prerequisites. ====> THIS MAY TAKE QUITE SOME TIME <===== Loaded plugins: refresh-packagekit, security Setting up Remove Process No Match for argument: gnuradio* No Packages marked for removal Loaded plugins: refresh-packagekit, security Setting up Remove Process No Match for argument: libgruel-* No Packages marked for removal Loaded plugins: refresh-packagekit, security Setting up Remove Process No Match for argument: libgruel* No Packages marked for removal Loaded plugins: refresh-packagekit, security Setting up Group Process Warning: Group Engineering and Scientific does not exist. Package flex-2.5.35-9.el6.x86_64 already installed and latest version Package gcc-4.4.7-16.el6.x86_64 already installed and latest version Package redhat-rpm-config-9.0.3-44.sl6.noarch already installed and latest version Package rpm-build-4.8.0-47.el6.x86_64 already installed and latest version Package 1:make-3.81-20.el6.x86_64 already installed and latest version Package patch-2.6-6.el6.x86_64 already installed and latest version Package 1:pkgconfig-0.23-9.1.el6.x86_64 already installed and latest version Package gettext-0.17-18.el6.x86_64 already installed and latest version Package automake-1.11.1-4.el6.noarch already installed and latest version Package bison-2.4.1-5.el6.x86_64 already installed and latest version Package flex-devel-2.5.35-9.el6.x86_64 already installed and latest version Package libtool-2.2.6-15.5.el6.x86_64 already installed and latest version Package autoconf-2.63-5.1.el6.noarch already installed and latest version Package gcc-c++-4.4.7-16.el6.x86_64 already installed and latest version Package binutils-2.20.51.0.2-5.43.el6.x86_64 already installed and latest version Package patchutils-0.3.1-3.1.el6.x86_64 already installed and latest version Package byacc-1.9.20070509-7.el6.x86_64 already installed and latest version Package indent-2.2.10-7.el6.x86_64 already installed and latest version Package systemtap-2.7-2.el6.x86_64 already installed and latest version Package diffstat-1.51-2.el6.x86_64 already installed and latest version Package elfutils-0.161-3.el6.x86_64 already installed and latest version Package cvs-1.11.23-16.el6.x86_64 already installed and latest version Package rcs-5.7-37.el6.x86_64 already installed and latest version Package subversion-1.6.11-15.el6_7.x86_64 already installed and latest version Package gcc-gfortran-4.4.7-16.el6.x86_64 already installed and latest version Package 1:doxygen-1.6.1-6.el6.x86_64 already installed and latest version Package intltool-0.41.0-1.1.el6.noarch already installed and latest version Package git-1.8.3.1-1.sdl6.x86_64 already installed and latest version Package ctags-5.8-2.el6.x86_64 already installed and latest version Package cscope-15.6-6.el6.x86_64 already installed and latest version Package swig-1.3.40-6.el6.x86_64 already installed and latest version Warning: Group development does not have any packages. No packages in any requested group available to install or update Loaded plugins: refresh-packagekit, security Setting up Install Process Package fftw-devel-3.2.1-3.1.el6.x86_64 already installed and latest version Package cppunit-devel-1.12.1-3.1.el6.x86_64 already installed and latest version Package wxPython-devel-2.8.12.0-1.puias6.x86_64 already installed and latest version Package libusb-devel-0.1.12-23.el6.x86_64 already installed and latest version Package boost-devel-1.41.0-27.el6.x86_64 already installed and latest version Package alsa-lib-devel-1.0.22-3.el6.x86_64 already installed and latest version Package 1:numpy-1.6.2-0.1.puias6.x86_64 already installed and latest version Package gsl-devel-1.13-1.el6.x86_64 already installed and latest version Package python-devel-2.6.6-64.el6.x86_64 already installed and latest version No package pygsl available. Package python-cheetah-2.4.1-1.el6.x86_64 already installed and latest version Package python-mako-0.3.4-1.el6.noarch already installed and latest version Package python-lxml-2.2.3-1.1.el6.x86_64 already installed and latest version Package PyOpenGL-3.0.0-2.1.el6.noarch already installed and latest version Package 1:qt-devel-4.6.2-28.el6_5.x86_64 already installed and latest version Package 1:qt-4.6.2-28.el6_5.x86_64 already installed and latest version Package 1:qt-4.6.2-28.el6_5.x86_64 already installed and latest version Package 1:qt-devel-4.6.2-28.el6_5.x86_64 already installed and latest version Package PyQt4-devel-4.6.2-9.el6.x86_64 already installed and latest version Package qwt-devel-5.1.1-4.1.el6.x86_64 already installed and latest version Package qwtplot3d-qt4-devel-0.2.7-9.el6.x86_64 already installed and latest version Package libusb-0.1.12-23.el6.x86_64 already installed and latest version Package libusb-devel-0.1.12-23.el6.x86_64 already installed and latest version Package libusb1-1.0.9-0.6.rc1.el6.x86_64 already installed and latest version Package libusb1-devel-1.0.9-0.6.rc1.el6.x86_64 already installed and latest version Package cmake-2.8.12.2-4.el6.x86_64 already installed and latest version Package git-1.8.3.1-1.sdl6.x86_64 already installed and latest version Package wget-1.12-5.el6_6.1.x86_64 already installed and latest version Package python-docutils-0.6-1.el6.noarch already installed and latest version Package PyQwt-5.2.0-11.puias6.x86_64 already installed and latest version Package PyQwt-devel-5.2.0-11.puias6.x86_64 already installed and latest version Package qwt-devel-5.1.1-4.1.el6.x86_64 already installed and latest version Package gtk2-engines-2.18.4-5.el6.x86_64 already installed and latest version Package xmlrpc-c-client-1.16.24-1210.1840.el6.x86_64 already installed and latest version Package xmlrpc-c-c++-1.16.24-1210.1840.el6.x86_64 already installed and latest version Package xmlrpc-c-devel-1.16.24-1210.1840.el6.x86_64 already installed and latest version Package xmlrpc-c-apps-1.16.24-1210.1840.el6.x86_64 already installed and latest version Package xmlrpc-c-1.16.24-1210.1840.el6.x86_64 already installed and latest version Package xmlrpc-c-client++-1.16.24-1210.1840.el6.x86_64 already installed and latest version No package libzmq available. No package libzmq-dev available. Package tkinter-2.6.6-64.el6.x86_64 already installed and latest version Package orc-0.4.16-6.el6.x86_64 already installed and latest version Package python-requests-2.6.0-3.el6.noarch already installed and latest version Nothing to do Checking for library libusb ...Found library libusb Checking for library libboost ...Found library libboost Checking for library libcppunit ...Found library libcppunit Checking for library libfftw ...Found library libfftw Checking for library libgsl ...Found library libgsl Done This script will fetch Gnu Radio version 3.7/maint from the repositories, along with compatible extras. Is this OK?yes Fetching various packages (Gnu Radio, UHD, gr-osmosdr, gr-iqbal, etc) via the Internet =======> THIS MAY TAKE QUITE SOME TIME <========= Fetching Gnu Radio via GIT...Cloning into 'gnuradio'... Submodule 'volk' (https://github.com/gnuradio/volk.git) registered for path 'volk' Cloning into 'volk'... remote: Counting objects: 5589, done. remote: Total 5589 (delta 0), reused 0 (delta 0), pack-reused 5589 Receiving objects: 100% (5589/5589), 1.58 MiB | 266.00 KiB/s, done. Resolving deltas: 100% (3997/3997), done. Submodule path 'volk': checked out 'f0b722392950bf7ede7b32f5ff60019bce7a8592' M volk Branch maint set up to track remote branch maint from origin. Switched to a new branch 'maint' Done Fetching UHD via GIT...Cloning into 'uhd'... remote: Counting objects: 53257, done. remote: Compressing objects: 100% (33/33), done. remote: Total 53257 (delta 4), reused 0 (delta 0), pack-reused 53224 Receiving objects: 100% (53257/53257), 96.50 MiB | 1.25 MiB/s, done. Resolving deltas: 100% (40626/40626), done. Fetching rtl-sdr (rtl-sdr, gr-osmosdr, gr-iqbal, hackrf, bladeRF and airspy) via GIT Cloning into 'rtl-sdr'... remote: Counting objects: 1617, done. remote: Compressing objects: 100% (711/711), done. remote: Total 1617 (delta 1182), reused 1213 (delta 898) Receiving objects: 100% (1617/1617), 345.89 KiB | 529.00 KiB/s, done. Resolving deltas: 100% (1182/1182), done. Cloning into 'gr-osmosdr'... remote: Counting objects: 3818, done. remote: Compressing objects: 100% (2510/2510), done. remote: Total 3818 (delta 2737), reused 1886 (delta 1270) Receiving objects: 100% (3818/3818), 925.99 KiB | 876.00 KiB/s, done. Resolving deltas: 100% (2737/2737), done. Cloning into 'gr-iqbal'... remote: Counting objects: 219, done. remote: Compressing objects: 100% (175/175), done. remote: Total 219 (delta 109), reused 98 (delta 40) Receiving objects: 100% (219/219), 130.17 KiB | 0 bytes/s, done. Resolving deltas: 100% (109/109), done. Cloning into 'bladeRF'... remote: Counting objects: 16325, done. remote: Total 16325 (delta 0), reused 0 (delta 0), pack-reused 16325 Receiving objects: 100% (16325/16325), 6.81 MiB | 1.37 MiB/s, done. Resolving deltas: 100% (9380/9380), done. Submodule 'libosmo-dsp' (git://git.osmocom.org/libosmo-dsp) registered for path 'libosmo-dsp' Cloning into 'libosmo-dsp'... remote: Counting objects: 172, done. remote: Compressing objects: 100% (106/106), done. remote: Total 172 (delta 89), reused 123 (delta 58) Receiving objects: 100% (172/172), 60.12 KiB | 0 bytes/s, done. Resolving deltas: 100% (89/89), done. Submodule path 'libosmo-dsp': checked out 'f9df8894c72cbd491bdd2f6d4cbea95c46810267' Cloning into 'hackrf'... remote: Counting objects: 9629, done. remote: Total 9629 (delta 0), reused 0 (delta 0), pack-reused 9629 Receiving objects: 100% (9629/9629), 24.49 MiB | 21.42 MiB/s, done. Resolving deltas: 100% (6741/6741), done. Cloning into 'host'... remote: Counting objects: 626, done. remote: Total 626 (delta 0), reused 0 (delta 0), pack-reused 626 Receiving objects: 100% (626/626), 587.24 KiB | 0 bytes/s, done. Resolving deltas: 100% (452/452), done. Done Starting function uhd_build at: Wed Nov 18 17:41:12 EST 2015 Building UHD... =============> THIS WILL TAKE SOME TIME <============= -- The CXX compiler identification is GNU 4.4.7 -- The C compiler identification is GNU 4.4.7 -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- -- Configuring the python interpreter... -- Found PythonInterp: /usr/lib/python2.7/bin/python (found version "2.7.8") -- Python interpreter: /usr/lib/python2.7/bin/python -- Override with: -DPYTHON_EXECUTABLE=<path-to-python> -- Using UHD Images Directory: OFF -- Build type not specified: defaulting to release. -- Performing Test HAVE_VISIBILITY_HIDDEN -- Performing Test HAVE_VISIBILITY_HIDDEN - Success -- Performing Test HAVE_VISIBILITY_INLINES_HIDDEN -- Performing Test HAVE_VISIBILITY_INLINES_HIDDEN - Success -- -- Configuring Boost C++ Libraries... -- Could NOT find Boost -- Boost include directories: /usr/include -- Boost library directories: /usr/lib64 -- Boost libraries: -- Looking for log2 -- Looking for log2 - found -- -- Python checking for Python version 2.6 or greater -- Python checking for Python version 2.6 or greater - found -- -- Python checking for Mako templates 0.4 or greater -- Python checking for Mako templates 0.4 or greater - found -- -- Configuring LibUHD support... -- Dependency Boost_FOUND = 0 -- Dependency HAVE_PYTHON_PLAT_MIN_VERSION = TRUE -- Dependency HAVE_PYTHON_MODULE_MAKO = TRUE CMake Error at cmake/Modules/UHDComponent.cmake:51 (MESSAGE): Dependencies for required component LibUHD not met. Call Stack (most recent call first): CMakeLists.txt:279 (LIBUHD_REGISTER_COMPONENT) -- Configuring incomplete, errors occurred! See also "/home/ssaluja/test/uhd/host/build/CMakeFiles/CMakeOutput.log". make: *** No rule to make target `clean'. Stop. make: *** No targets specified and no makefile found. Stop. UHD build apparently failed Exiting UHD build ======================================================================= If you have found this script useful and time-saving, consider a donation to help me keep build-gnuradio, simple_ra, SIDsuite, meteor_detector, simple_fm_rcv, and multimode maintained and up to date. A simple paypal transfer to address@hidden is all you need to do. ====================================================================== Send success/fail info to sbrac.org? From: discuss-gnuradio-bounces+address@hidden [discuss-gnuradio-bounces+address@hidden on behalf of Marcus D. Leech address@hidden
Sent: Wednesday, November 18, 2015 3:58 PM To: address@hidden Subject: Re: [Discuss-gnuradio] Gnuradio-companion On 11/18/2015 03:45 PM, Sumit Saluja wrote:
If you run build-gnuradio with -v, you'll get more logs, and likely a note from Cmake that it couldn't find some depend that gnuradio-companion relies on.
|
| [Prev in Thread] | Current Thread | [Next in Thread] |