[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Change frequency in USRP source automatically

From: Yan Huang
Subject: [Discuss-gnuradio] Change frequency in USRP source automatically
Date: Mon, 14 Mar 2016 16:09:48 +0000

Hi all,


I want to change the frequency in “USRP source” automatically, for example 2.37GHz-2.43GHz with each time stepping 2MHz.


1. As you know, the USRP source has an input message port, so I want to connect it to a “Message strobe” to control the frequency change. But  after I see [1][2], I write PMT type commands  in “Message PMT” in “Message Strobe” as:


it comes up error “invalid syntax(<string>,line 1)”, so I don’t know how to further stepping the frequency.

2. If I use the “Message Strobe” to define frequency, what can I put in the “frequency” in “USRP source” block? Put it as 0?


[1] https://gnuradio.org/doc/doxygen/page_uhd.html#uhd_command_syntax

[2] https://gnuradio.org/doc/doxygen/page_msg_passing.html#msg_passing_commands


Many thanks ,




This message and any attachment are intended solely for the addressee
and may contain confidential information. If you have received this
message in error, please send it back to me, and immediately delete it. 

Please do not use, copy or disclose the information contained in this
message or in any attachment.  Any views or opinions expressed by the
author of this email do not necessarily reflect the views of the
University of Nottingham.

This message has been checked for viruses but the contents of an
attachment may still contain software viruses which could damage your
computer system, you are advised to perform your own checks. Email
communications with the University of Nottingham may be monitored as
permitted by UK legislation.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]