[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] [USRP-users] ADS-B receiver GNU Radio implementat

From: Derek Kozel
Subject: Re: [Discuss-gnuradio] [USRP-users] ADS-B receiver GNU Radio implementation
Date: Tue, 29 Mar 2016 09:09:46 -0700

Hello Royce,

It looks like there is GNU Radio support for the board you mention.

Assuming the Source block runs you should have little problem connecting it to the gr-air-modes blocks. I'd recommend reaching out to the discuss-gnuradio mailing list (cc'd here) and asking if anyone has experience there. And of course if you have the boards then just give it a try with a basic fft block to see if you're receiving spectrum.

Regards and good luck!

On Tue, Mar 29, 2016 at 12:33 AM, Royce Ramelb via USRP-users <address@hidden> wrote:
Hi all,
I am an undergrad student in my final year, currently working on my project. We are required to reimplement a project and I chose the ADS-B receiver. The code I use is Nick Foster's available in github <https://github.com/bistromath/gr-air-modes.git>. Is there anyone that also worked with the same code?
The problem is there is no ettus or osmocom platforms available in the lab as of the moment. I am planning to implement it through ADI-FMCOMMS3-EBZ board in ZedBoard instead. Is it possible/compatible? Are there someone who worked with similar platform?
Also, may I ask how the ip:port option in the source parameter of modes_rx works?
I hope you can find time to respond and help.
Thank you in advance

USRP-users mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]