Trying to use a HackRF
One with GNU Radio on Windows 10 (64-bits), installed from
gnuradio_3.7.11_win64.msi.
When using osmocom
Source and executing the flow graph, execution halts with
message: python.exe has stopped working. GRC remains alive.
Crashes happen both with
WX and QT. The HackRF One module is put into Receive mode
(Rx Led of HackRF One is on).
GNU Radio, GRC, Hack RF
and computer do work as expected with the
GNURadioLiveDVD.
Debugging shows:
Unhandled exception at 0x00007FFCCDDD3CCB (hackrf.dll) in
python.exe: 0xC000001D: Illegal Instruction.
Additional info from
Event Viewer:
Faulting application
path: C:\Program Files\GNURadio-3.7\gr-python27\python.exe
Faulting module path:
C:\Program Files\GNURadio-3.7\bin\hackrf.dll
And info from Console
Panel in GRC:
Win32; Microsoft Visual
C++ version 14.0; Boost_106000;
UHD_003.010.001.001-0-unknown
hackrf.dll info:
2017-03-03, 66.560 Bytes
gr-osmosdr ae686c46
(0.1.5git) gnuradio 3.7.11
built-in source types:
file osmosdr fcd rtl rtl_tcp uhd hackrf bladerf airspy
redpitaya
Number of USB devices:
17
USB device 1d50:xxxx:
0000000000000000a06063c82xxxxxxx match
Using HackRF One with
firmware 2017.02.1
Hardware:
Processor
Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 2794 Mhz, 4
Core(s), 8 Logical Processor(s)
Display
adapter AMD Radeon HD 5700 Series
Your support is highly
appreciated (I tried building GNU Radio from sources, which
failed as “gr-newmod/CMakeLists.txt was not found and is
required”, but I decided not to pursue the building path any
further as it exceeds my knowledge).