discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] test and build errors on 3.7.12git-101-g098dc3e0


From: lists
Subject: Re: [Discuss-gnuradio] test and build errors on 3.7.12git-101-g098dc3e0
Date: Sat, 29 Apr 2017 19:07:30 -0700

I suppose I could uninstall thrift since that looks really hosed on my system. 
That would get rid of some errors.

Is there a recommended rev?


  Original Message  
From: Ron Economos
Sent: Saturday, April 29, 2017 7:03 PM
To: address@hidden
Subject: Re: [Discuss-gnuradio] test and build errors on 3.7.12git-101-g098dc3e0

git checkout v3.7.11

But you're still going to have the same test failures. It's not 
something new.

Ron

On 04/29/2017 06:57 PM, address@hidden wrote:
> How do I go back one rev on github?
>
>
> Original Message
> From: Cinaed Simson
> Sent: Saturday, April 29, 2017 6:42 PM
> To: address@hidden
> Subject: Re: [Discuss-gnuradio] test and build errors on 
> 3.7.12git-101-g098dc3e0
>
> On 04/29/2017 05:52 PM, address@hidden wrote:
>> I have ZMQ. Here is the cmake finding it:
>>
>> -- Configuring gr-wxgui support...
>> -- Dependency ENABLE_GNURADIO_RUNTIME = ON
>> -- Dependency ENABLE_GR_FFT = ON
>> -- Dependency ENABLE_GR_FILTER = ON
>> -- Dependency ENABLE_GR_ANALOG = ON
>> -- Dependency ENABLE_PYTHON = ON
>> -- Dependency NUMPY_FOUND = TRUE
>> -- Dependency WX_FOUND = TRUE
>> -- Enabling gr-wxgui support.
>> -- Override with -DENABLE_GR_WXGUI=ON/OFF
>> -- Checking for module 'libzmq'
>> -- Found libzmq, version 4.1.2
>> -- Found ZEROMQ: /usr/lib64/libzmq.so
>> ----------------------------------------
>> I also have scipy, though I don't see it being looked for in the cmake.
> I'm running a release version - 3.7.11 - you're on 3.7.12 which is on
> the bleeding edge so your mileage may vary - it's work in progress
> unless I missed the email of its release.
>
> The test for polar uses python-scipy which requires scipy.
>
> See
>
> ./gnuradio-3.7.11/gr-fec/python/fec/polar/channel_construction_awgn.py
>
> which imports
>
> from scipy.optimize import fsolve
> from scipy.special import erfc
>
> In general, you need to run the run the qa scripts in the directories
> where the tests failed - assuming all the CMake configure errors or the
> software not found messages have been cleared.
>
> -- Cinaed
>
>> I missed this one, but I also have libcodec2.
>>
>> -- Configuring gr-vocoder support...
>> -- Dependency Boost_FOUND = 1
>> -- Dependency ENABLE_GNURADIO_RUNTIME = ON
>> -- Dependency ENABLE_GR_FFT = ON
>> -- Dependency ENABLE_GR_BLOCKS = ON
>> -- Dependency ENABLE_GR_FILTER = ON
>> -- Dependency ENABLE_GR_ANALOG = ON
>> -- Enabling gr-vocoder support.
>> -- Override with -DENABLE_GR_VOCODER=ON/OFF
>> -- Found libgsm: /usr/include/gsm, /usr/lib64/libgsm.so
>> -- System libcodec2 not found.
>> -- Checking for module 'libusb-1.0'
>> -- Found libusb-1.0, version 1.0.20
>> -- Found libusb-1.0: /usr/include/libusb-1.0, /usr/lib64/libusb-1.0.so
>>
>>
>>
>>
>> On Sat, 29 Apr 2017 12:05:30 -0700
>> Ron Economos <address@hidden> wrote:
>>
>>> For the polar encoder/decoder and zeromq tests, you need the
>>> following dependencies. I'm not sure about the other failures.
>>>
>>> python-scipy
>>>
>>> python-zmq
>>>
>>> Ron
>>>
>>> On 04/29/2017 11:31 AM, address@hidden wrote:
>>>> Opensuse 42.2
>>>> uname -a
>>>> Linux linux-0u81 4.4.57-18.3-default #1 SMP Thu Mar 30 06:39:47 UTC
>>>> 2017 (39c8557) x86_64 x86_64 x86_64 GNU/Linux
>>>> ---------------
>>>> Building for version: 3.7.12git-101-g098dc3e0 / 3.7.12git
>>>> Entire cmake output at:
>>>> https://pastebin.com/Gqa32538
>>>> ----------
>>>> Errors in the doxygen build:
>>>> https://pastebin.com/2KVp6v9X
>>>> --------------------------------
>>>>
>>>> 95% tests passed, 11 tests failed out of 220
>>>>
>>>> Total Test time (real) = 3850.12 sec
>>>>
>>>> The following tests FAILED:
>>>> 18 - qa_cpp_py_binding (Failed)
>>>> 22 - qa_ctrlport_probes (Failed)
>>>> 51 - qa_cpp_py_binding_set (Failed)
>>>> 84 - qa_python_message_passing (Failed)
>>>> 89 - qa_polar_encoder_systematic (Failed)
>>>> 92 - qa_polar_encoder (Failed)
>>>> 94 - qa_polar_decoder_sc (Failed)
>>>> 95 - qa_polar_decoder_sc_list (Failed)
>>>> 98 - qa_polar_decoder_sc_systematic (Failed)
>>>> 218 - qa_zeromq_sub (Failed)
>>>> 219 - qa_zeromq_pub (Failed)
>>>> Errors while running CTest
>>>> Makefile:72: recipe for target 'test' failed
>>>> make: *** [test] Error 8
>>>>
>>>> For the complete make test:
>>>> https://pastebin.com/JwHqDGrc
>>>> ------------------------
>>>>
>>>> ctest -V -R ctrlport_probes
>>>> UpdateCTestConfiguration
>>>> from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
>>>> UpdateCTestConfiguration
>>>> from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
>>>> Test project /usr/local/src/gnuradio_latest/gnuradio/build
>>>> Constructing a list of tests
>>>> Done constructing a list of tests
>>>> Checking test dependency graph...
>>>> Checking test dependency graph end
>>>> test 22
>>>> Start 22: qa_ctrlport_probes
>>>>
>>>> 22: Test command: /usr/bin/sh
>>>> "/usr/local/src/gnuradio_latest/gnuradio/build/gr-blocks/python/blocks/qa_ctrlport_probes_test.sh"
>>>> 22: Test timeout computed to be: 9.99988e+06
>>>> 22: gr::log :INFO: controlport - Apache Thrift: -h linux-0u81 -p
>>>> 42407 22: Could not connect to ControlPort endpoint at
>>>> linux-0u81:42407. 22:
>>>> 22: Exception socket.error: (32, 'Broken pipe') in <bound method
>>>> ThriftRadioClient.__del__ of
>>>> <gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
>>>> at
>>>> 0x7f046ca06200>> ignored
>>>> 22: Could not connect to ControlPort endpoint at linux-0u81:42407.
>>>> 22:
>>>> 22: Exception socket.error: (32, 'Broken pipe') in <bound method
>>>> ThriftRadioClient.__del__ of
>>>> <gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
>>>> at
>>>> 0x7f046ca117e8>> ignored
>>>> 22: Could not connect to ControlPort endpoint at linux-0u81:42407.
>>>> 22:
>>>> 22: Exception socket.error: (32, 'Broken pipe') in <bound method
>>>> ThriftRadioClient.__del__ of
>>>> <gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
>>>> at
>>>> 0x7f046ca11b48>> ignored
>>>> 22: Could not connect to ControlPort endpoint at linux-0u81:42407.
>>>> 22:
>>>> 22: Exception socket.error: (32, 'Broken pipe') in <bound method
>>>> ThriftRadioClient.__del__ of
>>>> <gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
>>>> at
>>>> 0x7f046ca11e60>> ignored
>>>> ^C^C
>>>> ------------------------------------
>>>> ctest -V -R cpp_py
>>>> UpdateCTestConfiguration
>>>> from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
>>>> UpdateCTestConfiguration
>>>> from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
>>>> Test project /usr/local/src/gnuradio_latest/gnuradio/build
>>>> Constructing a list of tests
>>>> Done constructing a list of tests
>>>> Checking test dependency graph...
>>>> Checking test dependency graph end
>>>> test 18
>>>> Start 18: qa_cpp_py_binding
>>>>
>>>> 18: Test command: /usr/bin/sh
>>>> "/usr/local/src/gnuradio_latest/gnuradio/build/gr-blocks/python/blocks/qa_cpp_py_binding_test.sh"
>>>> 18: Test timeout computed to be: 9.99988e+06
>>>> 18: gr::log :INFO: controlport - Apache Thrift: -h linux-0u81 -p
>>>> 41848 18: Could not connect to ControlPort endpoint at
>>>> linux-0u81:41848. 18:
>>>> 18: Exception socket.error: (32, 'Broken pipe') in <bound method
>>>> ThriftRadioClient.__del__ of
>>>> <gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
>>>> at 0x7f81c0071518>> ignored ^C^C
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Discuss-gnuradio mailing list
>>>> address@hidden
>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>>
>>>
>>> _______________________________________________
>>> Discuss-gnuradio mailing list
>>> address@hidden
>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>


_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio



reply via email to

[Prev in Thread] Current Thread [Next in Thread]