[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Rational Resampler no output.
From: |
Cor Legemaat |
Subject: |
Re: [Discuss-gnuradio] Rational Resampler no output. |
Date: |
Thu, 01 Jun 2017 07:20:33 +0200 |
Hi:
filter.firdes.low_pass get called with:
* fractional_bw = 0.4
* trans_width = 0.1
* mid_transition_band = 0.45
* interpolation = 24
But return: (nan, <788 times nan>)
Regards:
Cor
On Tue, 2017-05-30 at 00:06 +0200, Marcus Müller wrote:
> Hi Cor,
> > * When using 1 as "taps" there is output.
> Aha!!
> So, here's the thing: something might be going wrong in the python
> code that sets up the taps automatically if you don't set them
> explicitly.
> Maybe you can figure out where things go wrong; the interesting part
> (maybe add some `print`s here?) from [1]:
>
> # If we don't have user-provided taps, reduce the interp and
> # decim values by the GCD (if there is one) and then define
> # the taps from these new values.
> if taps is None:
> interpolation = interpolation // d
> decimation = decimation // d
> taps = design_filter(interpolation, decimation,
> fractional_bw)
>
> and
>
>
> def design_filter(interpolation, decimation, fractional_bw):
> """
> Given the interpolation rate, decimation rate and a fractional
> bandwidth,
> design a set of taps.
>
> Args:
> interpolation: interpolation factor (integer > 0)
> decimation: decimation factor (integer > 0)
> fractional_bw: fractional bandwidth in (0, 0.5) 0.4 works
> well. (float)
> Returns:
> : sequence of numbers
> """
>
> if fractional_bw >= 0.5 or fractional_bw <= 0:
> raise ValueError, "Invalid fractional_bandwidth, must be in
> (0, 0.5)"
>
> beta = 7.0
> halfband = 0.5
> rate = float(interpolation)/float(decimation)
> if(rate >= 1.0):
> trans_width = halfband - fractional_bw
> mid_transition_band = halfband - trans_width/2.0
> else:
> trans_width = rate*(halfband - fractional_bw)
> mid_transition_band = rate*halfband - trans_width/2.0
>
> taps = filter.firdes.low_pass(interpolation,
> # gain
> interpolation,
> # Fs
> mid_transition_band,
> # trans mid point
> trans_width,
> # transition width
> filter.firdes.WIN_KAISER,
> beta)
> # beta
>
> return taps
>
>
>
> Best regards,
> Marcus
>
> [1] https://github.com/gnuradio/gnuradio/blob/master/gr-filter/python
> /filter/rational_resampler.py
>
> On 29.05.2017 19:01, Cor Legemaat wrote:
> > Hi:
> >
> > * The only warning is about the thread priority but that's on
> > both.
> > * Type "Complex->Complex (Complex Taps)"
> > * When using 1 as "taps" there is output.
> >
> > I can open it in Nemiver if I know where to put the break point...
> >
> > Regards:
> > Cor
> >
> > On Mon, 2017-05-29 at 11:36 +0200, Marcus Müller wrote:
> > > Hi Cor,
> > > that's kind of surprising¹. My first bet is that your AMD system
> > > is
> > > missing some dependency that the intel system has, so that
> > > something
> > > goes wrong during build. But then again, you shouldn't be seeing
> > > the
> > > rational resampler block at all in that case. Let's head straight
> > > to
> > > debugging:
> > > * Do you get any warning/console output during the execution of
> > > that
> > > flow graph?
> > > * Which is the input/output type (float or complex, orange or
> > > blue
> > > connector in GRC, if using that)
> > > * If in GRC: when explicitly using [1,] as "taps", do you get
> > > output?
> > > Best regards,
> > > Marcus
> > >
> > > ¹ "wat?!"
> > >
> > > On 29.05.2017 06:35, Cor Legemaat wrote:
> > > > Hi:
> > > >
> > > > I have 2 different hardware setup's with funtoo/gentoo and
> > > > gnuradio
> > > > installed. On the Intel system the "Rational Resampler" is
> > > > working
> > > > correctly but on the AMD system there is no output. This is on
> > > > a
> > > > flow
> > > > graph for an basic wide band fm receiver based on the USPR
> > > > 10min fm
> > > > receiver tutorial.
> > > >
> > > > AMD system:
> > > > * AMD FX(tm)-8150 Eight-Core Processor
> > > > * CPU_FLAGS_X86="aes avx fma4 mmx mmxext popcnt sse sse2 sse3
> > > > sse4_1 sse4_2 sse4a ssse3 xop"
> > > >
> > > > Intel system:
> > > > * Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz
> > > > * CPU_FLAGS_X86="aes avx mmx mmxext popcnt sse sse2 sse3
> > > > sse4_1
> > > > sse4_2
> > > > ssse3"
> > > >
> > > > Tried with different versions of GNURadio and gcc but the same
> > > > symptoms, both systems is compiled with CFLAGS="-march=native
> > > > -O2
> > > > -pipe". At the moment it is gcc:6.3.0 and net-
> > > > wireless/gnuradio-
> > > > 3.7.11:0/3.7.11 USE="alsa analog atsc audio channels digital
> > > > doc
> > > > dtv
> > > > examples fec filter grc noaa pager performance-counters
> > > > portaudio
> > > > qt4
> > > > uhd utils vocoder wavelet wxwidgets zeromq -fcd -jack -log -oss
> > > > -sdl {-
> > > > test} -trellis" PYTHON_TARGETS="python2_7"
> > > >
> > > > Where do I start to search?
> > > >
> > > > Regards:
> > > > Cor
> > > >
> > > >
> > > > _______________________________________________
> > > > Discuss-gnuradio mailing list
> > > > address@hidden
> > > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> > >
> > >
> > >
> > > _______________________________________________
> > > Discuss-gnuradio mailing list
> > > address@hidden
> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
signature.asc
Description: This is a digitally signed message part
- Re: [Discuss-gnuradio] Rational Resampler no output.,
Cor Legemaat <=
- Re: [Discuss-gnuradio] Rational Resampler no output., Marcus Müller, 2017/06/05
- Re: [Discuss-gnuradio] Rational Resampler no output., Anon Lister, 2017/06/07
- Re: [Discuss-gnuradio] Rational Resampler no output., Cor Legemaat, 2017/06/21
- Re: [Discuss-gnuradio] Rational Resampler no output., Cor Legemaat, 2017/06/26
- Re: [Discuss-gnuradio] Rational Resampler no output., Marcus Müller, 2017/06/26
- Re: [Discuss-gnuradio] Rational Resampler no output., Cor Legemaat, 2017/06/27
- Re: [Discuss-gnuradio] Rational Resampler no output., Marcus Müller, 2017/06/27
- Re: [Discuss-gnuradio] Rational Resampler no output., Cor Legemaat, 2017/06/27